Export limit exceeded: 22790 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22790 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54136 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: sprd: Fix DMA buffer leak issue Release DMA buffer when _probe() returns failure to avoid memory leak. | ||||
| CVE-2023-54146 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Fix double-free of elf header buffer After b3e34a47f989 ("x86/kexec: fix memory leak of elf header buffer"), freeing image->elf_headers in the error path of crash_load_segments() is not needed because kimage_file_post_load_cleanup() will take care of that later. And not clearing it could result in a double-free. Drop the superfluous vfree() call at the error path of crash_load_segments(). | ||||
| CVE-2023-54178 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name() when kmalloc() fail to allocate memory in kasprintf(), name or full_name will be NULL, strcmp() will cause null pointer dereference. | ||||
| CVE-2025-40321 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix crash while sending Action Frames in standalone AP Mode Currently, whenever there is a need to transmit an Action frame, the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to firmware. The P2P interfaces were available when wpa_supplicant is managing the wlan interface. However, the P2P interfaces are not created/initialized when only hostapd is managing the wlan interface. And if hostapd receives an ANQP Query REQ Action frame even from an un-associated STA, the brcmfmac driver tries to use an uninitialized P2P vif pointer for sending the IOVAR to firmware. This NULL pointer dereferencing triggers a driver crash. [ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] [ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [...] [ 1417.075653] Call trace: [ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac] [ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac] [ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211] [ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211] [ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158 [ 1417.076302] genl_rcv_msg+0x220/0x2a0 [ 1417.076317] netlink_rcv_skb+0x68/0x140 [ 1417.076330] genl_rcv+0x40/0x60 [ 1417.076343] netlink_unicast+0x330/0x3b8 [ 1417.076357] netlink_sendmsg+0x19c/0x3f8 [ 1417.076370] __sock_sendmsg+0x64/0xc0 [ 1417.076391] ____sys_sendmsg+0x268/0x2a0 [ 1417.076408] ___sys_sendmsg+0xb8/0x118 [ 1417.076427] __sys_sendmsg+0x90/0xf8 [ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40 [ 1417.076465] invoke_syscall+0x50/0x120 [ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0 [ 1417.076506] do_el0_svc+0x24/0x38 [ 1417.076525] el0_svc+0x30/0x100 [ 1417.076548] el0t_64_sync_handler+0x100/0x130 [ 1417.076569] el0t_64_sync+0x190/0x198 [ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000) Fix this, by always using the vif corresponding to the wdev on which the Action frame Transmission request was initiated by the userspace. This way, even if P2P vif is not available, the IOVAR is sent to firmware on AP vif and the ANQP Query RESP Action frame is transmitted without crashing the driver. Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev() to brcmf_p2p_attach(). Because the former function would not get executed when only hostapd is managing wlan interface, and it is not safe to do reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior init_completion(). And in the brcmf_p2p_tx_action_frame() function, the condition check for P2P Presence response frame is not needed, since the wpa_supplicant is properly sending the P2P Presense Response frame on the P2P-GO vif instead of the P2P-Device vif. [Cc stable] | ||||
| CVE-2023-54170 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: keys: Fix linking a duplicate key to a keyring's assoc_array When making a DNS query inside the kernel using dns_query(), the request code can in rare cases end up creating a duplicate index key in the assoc_array of the destination keyring. It is eventually found by a BUG_ON() check in the assoc_array implementation and results in a crash. Example report: [2158499.700025] kernel BUG at ../lib/assoc_array.c:652! [2158499.700039] invalid opcode: 0000 [#1] SMP PTI [2158499.700065] CPU: 3 PID: 31985 Comm: kworker/3:1 Kdump: loaded Not tainted 5.3.18-150300.59.90-default #1 SLE15-SP3 [2158499.700096] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [2158499.700351] Workqueue: cifsiod cifs_resolve_server [cifs] [2158499.700380] RIP: 0010:assoc_array_insert+0x85f/0xa40 [2158499.700401] Code: ff 74 2b 48 8b 3b 49 8b 45 18 4c 89 e6 48 83 e7 fe e8 95 ec 74 00 3b 45 88 7d db 85 c0 79 d4 0f 0b 0f 0b 0f 0b e8 41 f2 be ff <0f> 0b 0f 0b 81 7d 88 ff ff ff 7f 4c 89 eb 4c 8b ad 58 ff ff ff 0f [2158499.700448] RSP: 0018:ffffc0bd6187faf0 EFLAGS: 00010282 [2158499.700470] RAX: ffff9f1ea7da2fe8 RBX: ffff9f1ea7da2fc1 RCX: 0000000000000005 [2158499.700492] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [2158499.700515] RBP: ffffc0bd6187fbb0 R08: ffff9f185faf1100 R09: 0000000000000000 [2158499.700538] R10: ffff9f1ea7da2cc0 R11: 000000005ed8cec8 R12: ffffc0bd6187fc28 [2158499.700561] R13: ffff9f15feb8d000 R14: ffff9f1ea7da2fc0 R15: ffff9f168dc0d740 [2158499.700585] FS: 0000000000000000(0000) GS:ffff9f185fac0000(0000) knlGS:0000000000000000 [2158499.700610] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2158499.700630] CR2: 00007fdd94fca238 CR3: 0000000809d8c006 CR4: 00000000003706e0 [2158499.700702] Call Trace: [2158499.700741] ? key_alloc+0x447/0x4b0 [2158499.700768] ? __key_link_begin+0x43/0xa0 [2158499.700790] __key_link_begin+0x43/0xa0 [2158499.700814] request_key_and_link+0x2c7/0x730 [2158499.700847] ? dns_resolver_read+0x20/0x20 [dns_resolver] [2158499.700873] ? key_default_cmp+0x20/0x20 [2158499.700898] request_key_tag+0x43/0xa0 [2158499.700926] dns_query+0x114/0x2ca [dns_resolver] [2158499.701127] dns_resolve_server_name_to_ip+0x194/0x310 [cifs] [2158499.701164] ? scnprintf+0x49/0x90 [2158499.701190] ? __switch_to_asm+0x40/0x70 [2158499.701211] ? __switch_to_asm+0x34/0x70 [2158499.701405] reconn_set_ipaddr_from_hostname+0x81/0x2a0 [cifs] [2158499.701603] cifs_resolve_server+0x4b/0xd0 [cifs] [2158499.701632] process_one_work+0x1f8/0x3e0 [2158499.701658] worker_thread+0x2d/0x3f0 [2158499.701682] ? process_one_work+0x3e0/0x3e0 [2158499.701703] kthread+0x10d/0x130 [2158499.701723] ? kthread_park+0xb0/0xb0 [2158499.701746] ret_from_fork+0x1f/0x40 The situation occurs as follows: * Some kernel facility invokes dns_query() to resolve a hostname, for example, "abcdef". The function registers its global DNS resolver cache as current->cred.thread_keyring and passes the query to request_key_net() -> request_key_tag() -> request_key_and_link(). * Function request_key_and_link() creates a keyring_search_context object. Its match_data.cmp method gets set via a call to type->match_preparse() (resolves to dns_resolver_match_preparse()) to dns_resolver_cmp(). * Function request_key_and_link() continues and invokes search_process_keyrings_rcu() which returns that a given key was not found. The control is then passed to request_key_and_link() -> construct_alloc_key(). * Concurrently to that, a second task similarly makes a DNS query for "abcdef." and its result gets inserted into the DNS resolver cache. * Back on the first task, function construct_alloc_key() first runs __key_link_begin() to determine an assoc_array_edit operation to insert a new key. Index keys in the array are compared exactly as-is, using keyring_compare_object(). The operation ---truncated--- | ||||
| CVE-2023-54191 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit Always purge mcu skb queues in mt7996_mcu_exit routine even if mt7996_firmware_state fails. | ||||
| CVE-2025-40286 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: fix possible memory leak in smb2_read() Memory leak occurs when ksmbd_vfs_read() fails. Fix this by adding the missing kvfree(). | ||||
| CVE-2023-54291 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vduse: fix NULL pointer dereference vduse_vdpa_set_vq_affinity callback can be called with NULL value as cpu_mask when deleting the vduse device. This patch resets virtqueue's IRQ affinity mask value to set all CPUs instead of dereferencing NULL cpu_mask. [ 4760.952149] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 4760.959110] #PF: supervisor read access in kernel mode [ 4760.964247] #PF: error_code(0x0000) - not-present page [ 4760.969385] PGD 0 P4D 0 [ 4760.971927] Oops: 0000 [#1] PREEMPT SMP PTI [ 4760.976112] CPU: 13 PID: 2346 Comm: vdpa Not tainted 6.4.0-rc6+ #4 [ 4760.982291] Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.8.1 06/26/2020 [ 4760.989769] RIP: 0010:memcpy_orig+0xc5/0x130 [ 4760.994049] Code: 16 f8 4c 89 07 4c 89 4f 08 4c 89 54 17 f0 4c 89 5c 17 f8 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 fa 08 72 1b <4c> 8b 06 4c 8b 4c 16 f8 4c 89 07 4c 89 4c 17 f8 c3 cc cc cc cc 66 [ 4761.012793] RSP: 0018:ffffb1d565abb830 EFLAGS: 00010246 [ 4761.018020] RAX: ffff9f4bf6b27898 RBX: ffff9f4be23969c0 RCX: ffff9f4bcadf6400 [ 4761.025152] RDX: 0000000000000008 RSI: 0000000000000000 RDI: ffff9f4bf6b27898 [ 4761.032286] RBP: 0000000000000000 R08: 0000000000000008 R09: 0000000000000000 [ 4761.039416] R10: 0000000000000000 R11: 0000000000000600 R12: 0000000000000000 [ 4761.046549] R13: 0000000000000000 R14: 0000000000000080 R15: ffffb1d565abbb10 [ 4761.053680] FS: 00007f64c2ec2740(0000) GS:ffff9f635f980000(0000) knlGS:0000000000000000 [ 4761.061765] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4761.067513] CR2: 0000000000000000 CR3: 0000001875270006 CR4: 00000000007706e0 [ 4761.074645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4761.081775] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4761.088909] PKRU: 55555554 [ 4761.091620] Call Trace: [ 4761.094074] <TASK> [ 4761.096180] ? __die+0x1f/0x70 [ 4761.099238] ? page_fault_oops+0x171/0x4f0 [ 4761.103340] ? exc_page_fault+0x7b/0x180 [ 4761.107265] ? asm_exc_page_fault+0x22/0x30 [ 4761.111460] ? memcpy_orig+0xc5/0x130 [ 4761.115126] vduse_vdpa_set_vq_affinity+0x3e/0x50 [vduse] [ 4761.120533] virtnet_clean_affinity.part.0+0x3d/0x90 [virtio_net] [ 4761.126635] remove_vq_common+0x1a4/0x250 [virtio_net] [ 4761.131781] virtnet_remove+0x5d/0x70 [virtio_net] [ 4761.136580] virtio_dev_remove+0x3a/0x90 [ 4761.140509] device_release_driver_internal+0x19b/0x200 [ 4761.145742] bus_remove_device+0xc2/0x130 [ 4761.149755] device_del+0x158/0x3e0 [ 4761.153245] ? kernfs_find_ns+0x35/0xc0 [ 4761.157086] device_unregister+0x13/0x60 [ 4761.161010] unregister_virtio_device+0x11/0x20 [ 4761.165543] device_release_driver_internal+0x19b/0x200 [ 4761.170770] bus_remove_device+0xc2/0x130 [ 4761.174782] device_del+0x158/0x3e0 [ 4761.178276] ? __pfx_vdpa_name_match+0x10/0x10 [vdpa] [ 4761.183336] device_unregister+0x13/0x60 [ 4761.187260] vdpa_nl_cmd_dev_del_set_doit+0x63/0xe0 [vdpa] | ||||
| CVE-2025-40239 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: phy: micrel: always set shared->phydev for LAN8814 Currently, during the LAN8814 PTP probe shared->phydev is only set if PTP clock gets actually set, otherwise the function will return before setting it. This is an issue as shared->phydev is unconditionally being used when IRQ is being handled, especially in lan8814_gpio_process_cap and since it was not set it will cause a NULL pointer exception and crash the kernel. So, simply always set shared->phydev to avoid the NULL pointer exception. | ||||
| CVE-2023-54305 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: refuse to create ea block when umounted The ea block expansion need to access s_root while it is already set as NULL when umount is triggered. Refuse this request to avoid panic. | ||||
| CVE-2023-54307 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ptp_qoriq: fix memory leak in probe() Smatch complains that: drivers/ptp/ptp_qoriq.c ptp_qoriq_probe() warn: 'base' from ioremap() not released. Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'. This is only a bug if ptp_qoriq_init() returns on the first -ENODEV error path. For other error paths ptp_qoriq->base and base are the same. And this change makes the code more readable. | ||||
| CVE-2025-21086 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.5 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. | ||||
| CVE-2025-22893 | 2 Intel, Linux | 2 Ethernet 800 Series Software, Linux Kernel | 2026-04-15 | 7.8 High |
| Insufficient control flow management in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-40003 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work The origin code calls cancel_delayed_work() in ocelot_stats_deinit() to cancel the cyclic delayed work item ocelot->stats_work. However, cancel_delayed_work() may fail to cancel the work item if it is already executing. While destroy_workqueue() does wait for all pending work items in the work queue to complete before destroying the work queue, it cannot prevent the delayed work item from being rescheduled within the ocelot_check_stats_work() function. This limitation exists because the delayed work item is only enqueued into the work queue after its timer expires. Before the timer expiration, destroy_workqueue() has no visibility of this pending work item. Once the work queue appears empty, destroy_workqueue() proceeds with destruction. When the timer eventually expires, the delayed work item gets queued again, leading to the following warning: workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0 ... RIP: 0010:__queue_work+0x875/0xaf0 ... RSP: 0018:ffff88806d108b10 EFLAGS: 00010086 RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88 RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2 R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000 R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0 FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0 Call Trace: <IRQ> ? kasan_report+0xc6/0xf0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? __pfx_delayed_work_timer_fn+0x10/0x10 call_timer_fn+0x25/0x1c0 __run_timer_base.part.0+0x3be/0x8c0 ? __pfx_delayed_work_timer_fn+0x10/0x10 ? rcu_sched_clock_irq+0xb06/0x27d0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? try_to_wake_up+0xb15/0x1960 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 tmigr_handle_remote_up+0x603/0x7e0 ? __pfx_tmigr_handle_remote_up+0x10/0x10 ? sched_balance_trigger+0x1c0/0x9f0 ? sched_tick+0x221/0x5a0 ? _raw_spin_lock_irq+0x80/0xe0 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? tick_nohz_handler+0x339/0x440 ? __pfx_tmigr_handle_remote_up+0x10/0x10 __walk_groups.isra.0+0x42/0x150 tmigr_handle_remote+0x1f4/0x2e0 ? __pfx_tmigr_handle_remote+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 ? hrtimer_interrupt+0x322/0x780 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... The following diagram reveals the cause of the above warning: CPU 0 (remove) | CPU 1 (delayed work callback) mscc_ocelot_remove() | ocelot_deinit() | ocelot_check_stats_work() ocelot_stats_deinit() | cancel_delayed_work()| ... | queue_delayed_work() destroy_workqueue() | (wait a time) | __queue_work() //UAF The above scenario actually constitutes a UAF vulnerability. The ocelot_stats_deinit() is only invoked when initialization failure or resource destruction, so we must ensure that any delayed work items cannot be rescheduled. Replace cancel_delayed_work() with disable_delayed_work_sync() to guarantee proper cancellation of the delayed work item and ensure completion of any currently executing work before the workqueue is deallocated. A deadlock concern was considered: ocelot_stats_deinit() is called in a process context and is not holding any locks that the delayed work item might also need. Therefore, the use of the _sync() variant is safe here. This bug was identified through static analysis. To reproduce the issue and validate the fix, I simulated ocelot-swit ---truncated--- | ||||
| CVE-2023-53987 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ping: Fix potentail NULL deref for /proc/net/icmp. After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. | ||||
| CVE-2023-53991 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Disallow unallocated resources to be returned In the event that the topology requests resources that have not been created by the system (because they are typically not represented in dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC blocks, until their allocation/assignment is being sanity-checked in "drm/msm/dpu: Reject topologies for which no DSC blocks are available") remain NULL but will still be returned out of dpu_rm_get_assigned_resources, where the caller expects to get an array containing num_blks valid pointers (but instead gets these NULLs). To prevent this from happening, where null-pointer dereferences typically result in a hard-to-debug platform lockup, num_blks shouldn't increase past NULL blocks and will print an error and break instead. After all, max_blks represents the static size of the maximum number of blocks whereas the actual amount varies per platform. ^1: which can happen after a git rebase ended up moving additions to _dpu_cfg to a different struct which has the same patch context. Patchwork: https://patchwork.freedesktop.org/patch/517636/ | ||||
| CVE-2025-68821 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix readahead reclaim deadlock Commit e26ee4efbc79 ("fuse: allocate ff->release_args only if release is needed") skips allocating ff->release_args if the server does not implement open. However in doing so, fuse_prepare_release() now skips grabbing the reference on the inode, which makes it possible for an inode to be evicted from the dcache while there are inflight readahead requests. This causes a deadlock if the server triggers reclaim while servicing the readahead request and reclaim attempts to evict the inode of the file being read ahead. Since the folio is locked during readahead, when reclaim evicts the fuse inode and fuse_evict_inode() attempts to remove all folios associated with the inode from the page cache (truncate_inode_pages_range()), reclaim will block forever waiting for the lock since readahead cannot relinquish the lock because it is itself blocked in reclaim: >>> stack_trace(1504735) folio_wait_bit_common (mm/filemap.c:1308:4) folio_lock (./include/linux/pagemap.h:1052:3) truncate_inode_pages_range (mm/truncate.c:336:10) fuse_evict_inode (fs/fuse/inode.c:161:2) evict (fs/inode.c:704:3) dentry_unlink_inode (fs/dcache.c:412:3) __dentry_kill (fs/dcache.c:615:3) shrink_kill (fs/dcache.c:1060:12) shrink_dentry_list (fs/dcache.c:1087:3) prune_dcache_sb (fs/dcache.c:1168:2) super_cache_scan (fs/super.c:221:10) do_shrink_slab (mm/shrinker.c:435:9) shrink_slab (mm/shrinker.c:626:10) shrink_node (mm/vmscan.c:5951:2) shrink_zones (mm/vmscan.c:6195:3) do_try_to_free_pages (mm/vmscan.c:6257:3) do_swap_page (mm/memory.c:4136:11) handle_pte_fault (mm/memory.c:5562:10) handle_mm_fault (mm/memory.c:5870:9) do_user_addr_fault (arch/x86/mm/fault.c:1338:10) handle_page_fault (arch/x86/mm/fault.c:1481:3) exc_page_fault (arch/x86/mm/fault.c:1539:2) asm_exc_page_fault+0x22/0x27 Fix this deadlock by allocating ff->release_args and grabbing the reference on the inode when preparing the file for release even if the server does not implement open. The inode reference will be dropped when the last reference on the fuse file is dropped (see fuse_file_put() -> fuse_release_end()). | ||||
| CVE-2023-53994 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ionic: remove WARN_ON to prevent panic_on_warn Remove unnecessary early code development check and the WARN_ON that it uses. The irq alloc and free paths have long been cleaned up and this check shouldn't have stuck around so long. | ||||
| CVE-2023-54002 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix assertion of exclop condition when starting balance Balance as exclusive state is compatible with paused balance and device add, which makes some things more complicated. The assertion of valid states when starting from paused balance needs to take into account two more states, the combinations can be hit when there are several threads racing to start balance and device add. This won't typically happen when the commands are started from command line. Scenario 1: With exclusive_operation state == BTRFS_EXCLOP_NONE. Concurrently adding multiple devices to the same mount point and btrfs_exclop_finish executed finishes before assertion in btrfs_exclop_balance, exclusive_operation will changed to BTRFS_EXCLOP_NONE state which lead to assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE || fs_info->exclusive_operation == BTRFS_EXCLOP_DEV_ADD, in fs/btrfs/ioctl.c:456 Call Trace: <TASK> btrfs_exclop_balance+0x13c/0x310 ? memdup_user+0xab/0xc0 ? PTR_ERR+0x17/0x20 btrfs_ioctl_add_dev+0x2ee/0x320 btrfs_ioctl+0x9d5/0x10d0 ? btrfs_ioctl_encoded_write+0xb80/0xb80 __x64_sys_ioctl+0x197/0x210 do_syscall_64+0x3c/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Scenario 2: With exclusive_operation state == BTRFS_EXCLOP_BALANCE_PAUSED. Concurrently adding multiple devices to the same mount point and btrfs_exclop_balance executed finish before the latter thread execute assertion in btrfs_exclop_balance, exclusive_operation will changed to BTRFS_EXCLOP_BALANCE_PAUSED state which lead to assertion failed: fs_info->exclusive_operation == BTRFS_EXCLOP_BALANCE || fs_info->exclusive_operation == BTRFS_EXCLOP_DEV_ADD || fs_info->exclusive_operation == BTRFS_EXCLOP_NONE, fs/btrfs/ioctl.c:458 Call Trace: <TASK> btrfs_exclop_balance+0x240/0x410 ? memdup_user+0xab/0xc0 ? PTR_ERR+0x17/0x20 btrfs_ioctl_add_dev+0x2ee/0x320 btrfs_ioctl+0x9d5/0x10d0 ? btrfs_ioctl_encoded_write+0xb80/0xb80 __x64_sys_ioctl+0x197/0x210 do_syscall_64+0x3c/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd An example of the failed assertion is below, which shows that the paused balance is also needed to be checked. root@syzkaller:/home/xsk# ./repro Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 Failed to add device /dev/vda, errno 14 [ 416.611428][ T7970] BTRFS info (device loop0): fs_info exclusive_operation: 0 Failed to add device /dev/vda, errno 14 [ 416.613973][ T7971] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.615456][ T7972] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.617528][ T7973] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.618359][ T7974] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.622589][ T7975] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.624034][ T7976] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.626420][ T7977] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.627643][ T7978] BTRFS info (device loop0): fs_info exclusive_operation: 3 Failed to add device /dev/vda, errno 14 [ 416.629006][ T7979] BTRFS info (device loop0): fs_info exclusive_operation: 3 [ 416.630298][ T7980] BTRFS info (device loop0): fs_info exclusive_operation: 3 Fai ---truncated--- | ||||
| CVE-2023-54008 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_vdpa: build affinity masks conditionally We try to build affinity mask via create_affinity_masks() unconditionally which may lead several issues: - the affinity mask is not used for parent without affinity support (only VDUSE support the affinity now) - the logic of create_affinity_masks() might not work for devices other than block. For example it's not rare in the networking device where the number of queues could exceed the number of CPUs. Such case breaks the current affinity logic which is based on group_cpus_evenly() who assumes the number of CPUs are not less than the number of groups. This can trigger a warning[1]: if (ret >= 0) WARN_ON(nr_present + nr_others < numgrps); Fixing this by only build the affinity masks only when - Driver passes affinity descriptor, driver like virtio-blk can make sure to limit the number of queues when it exceeds the number of CPUs - Parent support affinity setting config ops This help to avoid the warning. More optimizations could be done on top. [1] [ 682.146655] WARNING: CPU: 6 PID: 1550 at lib/group_cpus.c:400 group_cpus_evenly+0x1aa/0x1c0 [ 682.146668] CPU: 6 PID: 1550 Comm: vdpa Not tainted 6.5.0-rc5jason+ #79 [ 682.146671] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [ 682.146673] RIP: 0010:group_cpus_evenly+0x1aa/0x1c0 [ 682.146676] Code: 4c 89 e0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc e8 1b c4 74 ff 48 89 ef e8 13 ac 98 ff 4c 89 e7 45 31 e4 e8 08 ac 98 ff eb c2 <0f> 0b eb b6 e8 fd 05 c3 00 45 31 e4 eb e5 cc cc cc cc cc cc cc cc [ 682.146679] RSP: 0018:ffffc9000215f498 EFLAGS: 00010293 [ 682.146682] RAX: 000000000001f1e0 RBX: 0000000000000041 RCX: 0000000000000000 [ 682.146684] RDX: ffff888109922058 RSI: 0000000000000041 RDI: 0000000000000030 [ 682.146686] RBP: ffff888109922058 R08: ffffc9000215f498 R09: ffffc9000215f4a0 [ 682.146687] R10: 00000000000198d0 R11: 0000000000000030 R12: ffff888107e02800 [ 682.146689] R13: 0000000000000030 R14: 0000000000000030 R15: 0000000000000041 [ 682.146692] FS: 00007fef52315740(0000) GS:ffff888237380000(0000) knlGS:0000000000000000 [ 682.146695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 682.146696] CR2: 00007fef52509000 CR3: 0000000110dbc004 CR4: 0000000000370ee0 [ 682.146698] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 682.146700] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 682.146701] Call Trace: [ 682.146703] <TASK> [ 682.146705] ? __warn+0x7b/0x130 [ 682.146709] ? group_cpus_evenly+0x1aa/0x1c0 [ 682.146712] ? report_bug+0x1c8/0x1e0 [ 682.146717] ? handle_bug+0x3c/0x70 [ 682.146721] ? exc_invalid_op+0x14/0x70 [ 682.146723] ? asm_exc_invalid_op+0x16/0x20 [ 682.146727] ? group_cpus_evenly+0x1aa/0x1c0 [ 682.146729] ? group_cpus_evenly+0x15c/0x1c0 [ 682.146731] create_affinity_masks+0xaf/0x1a0 [ 682.146735] virtio_vdpa_find_vqs+0x83/0x1d0 [ 682.146738] ? __pfx_default_calc_sets+0x10/0x10 [ 682.146742] virtnet_find_vqs+0x1f0/0x370 [ 682.146747] virtnet_probe+0x501/0xcd0 [ 682.146749] ? vp_modern_get_status+0x12/0x20 [ 682.146751] ? get_cap_addr.isra.0+0x10/0xc0 [ 682.146754] virtio_dev_probe+0x1af/0x260 [ 682.146759] really_probe+0x1a5/0x410 | ||||