Export limit exceeded: 23100 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23100 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54287 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: imx: disable Ageing Timer interrupt request irq There maybe pending USR interrupt before requesting irq, however uart_add_one_port has not executed, so there will be kernel panic: [ 0.795668] Unable to handle kernel NULL pointer dereference at virtual addre ss 0000000000000080 [ 0.802701] Mem abort info: [ 0.805367] ESR = 0x0000000096000004 [ 0.808950] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.814033] SET = 0, FnV = 0 [ 0.816950] EA = 0, S1PTW = 0 [ 0.819950] FSC = 0x04: level 0 translation fault [ 0.824617] Data abort info: [ 0.827367] ISV = 0, ISS = 0x00000004 [ 0.831033] CM = 0, WnR = 0 [ 0.833866] [0000000000000080] user address but active_mm is swapper [ 0.839951] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 0.845953] Modules linked in: [ 0.848869] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.1+g56321e101aca #1 [ 0.855617] Hardware name: Freescale i.MX8MP EVK (DT) [ 0.860452] pstate: 000000c5 (nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.867117] pc : __imx_uart_rxint.constprop.0+0x11c/0x2c0 [ 0.872283] lr : imx_uart_int+0xf8/0x1ec The issue only happends in the inmate linux when Jailhouse hypervisor enabled. The test procedure is: while true; do jailhouse enable imx8mp.cell jailhouse cell linux xxxx sleep 10 jailhouse cell destroy 1 jailhouse disable sleep 5 done And during the upper test, press keys to the 2nd linux console. When `jailhouse cell destroy 1`, the 2nd linux has no chance to put the uart to a quiese state, so USR1/2 may has pending interrupts. Then when `jailhosue cell linux xx` to start 2nd linux again, the issue trigger. In order to disable irqs before requesting them, both UCR1 and UCR2 irqs should be disabled, so here fix that, disable the Ageing Timer interrupt in UCR2 as UCR1 does. | ||||
| CVE-2023-53789 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Improve page fault error reporting If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> [joro: Edit commit message] | ||||
| CVE-2022-50616 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: Use different devices for resource allocation and DT lookup Following by the below discussion, there's the potential UAF issue between regulator and mfd. https://lore.kernel.org/all/20221128143601.1698148-1-yangyingliang@huawei.com/ From the analysis of Yingliang CPU A |CPU B mt6370_probe() | devm_mfd_add_devices() | |mt6370_regulator_probe() | regulator_register() | //allocate init_data and add it to devres | regulator_of_get_init_data() i2c_unregister_device() | device_del() | devres_release_all() | // init_data is freed | release_nodes() | | // using init_data causes UAF | regulator_register() It's common to use mfd core to create child device for the regulator. In order to do the DT lookup for init data, the child that registered the regulator would pass its parent as the parameter. And this causes init data resource allocated to its parent, not itself. The issue happen when parent device is going to release and regulator core is still doing some operation of init data constraint for the regulator of child device. To fix it, this patch expand 'regulator_register' API to use the different devices for init data allocation and DT lookup. | ||||
| CVE-2022-50619 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr() If the number of pages from the userptr BO differs from the SG BO then the allocated memory for the SG table doesn't get freed before returning -EINVAL, which may lead to a memory leak in some error paths. Fix this by checking the number of pages before allocating memory for the SG table. | ||||
| CVE-2023-54247 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Silence a warning in btf_type_id_size() syzbot reported a warning in [1] with the following stacktrace: WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988 ... Call Trace: <TASK> map_check_btf kernel/bpf/syscall.c:1024 [inline] map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198 __sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040 __do_sys_bpf kernel/bpf/syscall.c:5162 [inline] __se_sys_bpf kernel/bpf/syscall.c:5160 [inline] __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd With the following btf [1] DECL_TAG 'a' type_id=4 component_idx=-1 [2] PTR '(anon)' type_id=0 [3] TYPE_TAG 'a' type_id=2 [4] VAR 'a' type_id=3, linkage=static and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG), the following WARN_ON_ONCE in btf_type_id_size() is triggered: if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) && !btf_type_is_var(size_type))) return NULL; Note that 'return NULL' is the correct behavior as we don't want a DECL_TAG type to be used as a btf_{key,value}_type_id even for the case like 'DECL_TAG -> STRUCT'. So there is no correctness issue here, we just want to silence warning. To silence the warning, I added DECL_TAG as one of kinds in btf_type_nosize() which will cause btf_type_id_size() returning NULL earlier without the warning. [1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ | ||||
| CVE-2023-54217 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/msm: Add missing check and destroy for alloc_ordered_workqueue" This reverts commit 643b7d0869cc7f1f7a5ac7ca6bd25d88f54e31d0. A recent patch that tried to fix up the msm_drm_init() paths with respect to the workqueue but only ended up making things worse: First, the newly added calls to msm_drm_uninit() on early errors would trigger NULL-pointer dereferences, for example, as the kms pointer would not have been initialised. (Note that these paths were also modified by a second broken error handling patch which in effect cancelled out this part when merged.) Second, the newly added allocation sanity check would still leak the previously allocated drm device. Instead of trying to salvage what was badly broken (and clearly not tested), let's revert the bad commit so that clean and backportable fixes can be added in its place. Patchwork: https://patchwork.freedesktop.org/patch/525107/ | ||||
| CVE-2022-50883 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Prevent decl_tag from being referenced in func_proto arg Syzkaller managed to hit another decl_tag issue: btf_func_proto_check kernel/bpf/btf.c:4506 [inline] btf_check_all_types kernel/bpf/btf.c:4734 [inline] btf_parse_type_sec+0x1175/0x1980 kernel/bpf/btf.c:4763 btf_parse kernel/bpf/btf.c:5042 [inline] btf_new_fd+0x65a/0xb00 kernel/bpf/btf.c:6709 bpf_btf_load+0x6f/0x90 kernel/bpf/syscall.c:4342 __sys_bpf+0x50a/0x6c0 kernel/bpf/syscall.c:5034 __do_sys_bpf kernel/bpf/syscall.c:5093 [inline] __se_sys_bpf kernel/bpf/syscall.c:5091 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5091 do_syscall_64+0x54/0x70 arch/x86/entry/common.c:48 This seems similar to commit ea68376c8bed ("bpf: prevent decl_tag from being referenced in func_proto") but for the argument. | ||||
| CVE-2022-50873 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses a reference of pointer as the argument of kfree, which is the wrong pointer and then may hit crash like this: Unable to handle kernel paging request at virtual address 00ffff003363e30c Internal error: Oops: 96000004 [#1] SMP Call trace: rb_next+0x20/0x5c ext4_readdir+0x494/0x5c4 [ext4] iterate_dir+0x168/0x1b4 __se_sys_getdents64+0x68/0x170 __arm64_sys_getdents64+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821) SMP: stopping secondary CPUs Starting crashdump kernel... | ||||
| CVE-2022-50826 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection() Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose() with a subdev state of NULL leads to a NULL pointer dereference. This can currently happen in imgu_subdev_set_selection() when the state passed in is NULL, as this method first gets pointers to both the "try" and "active" states and only then decides which to use. The same issue has been addressed for imgu_subdev_get_selection() with commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active selection access"). However the issue still persists in imgu_subdev_set_selection(). Therefore, apply a similar fix as done in the aforementioned commit to imgu_subdev_set_selection(). To keep things a bit cleaner, introduce helper functions for "crop" and "compose" access and use them in both imgu_subdev_set_selection() and imgu_subdev_get_selection(). | ||||
| CVE-2025-40313 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: pretend $Extend records as regular files Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()") requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/ S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records. | ||||
| CVE-2022-50679 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i40e: Fix DMA mappings leak During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler. | ||||
| CVE-2022-50655 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ppp: associate skb with a device at tx Syzkaller triggered flow dissector warning with the following: r0 = openat$ppp(0xffffffffffffff9c, &(0x7f0000000000), 0xc0802, 0x0) ioctl$PPPIOCNEWUNIT(r0, 0xc004743e, &(0x7f00000000c0)) ioctl$PPPIOCSACTIVE(r0, 0x40107446, &(0x7f0000000240)={0x2, &(0x7f0000000180)=[{0x20, 0x0, 0x0, 0xfffff034}, {0x6}]}) pwritev(r0, &(0x7f0000000040)=[{&(0x7f0000000140)='\x00!', 0x2}], 0x1, 0x0, 0x0) [ 9.485814] WARNING: CPU: 3 PID: 329 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0x1ee0/0x1fa0 [ 9.485929] skb_get_poff+0x53/0xa0 [ 9.485937] bpf_skb_get_pay_offset+0xe/0x20 [ 9.485944] ? ppp_send_frame+0xc2/0x5b0 [ 9.485949] ? _raw_spin_unlock_irqrestore+0x40/0x60 [ 9.485958] ? __ppp_xmit_process+0x7a/0xe0 [ 9.485968] ? ppp_xmit_process+0x5b/0xb0 [ 9.485974] ? ppp_write+0x12a/0x190 [ 9.485981] ? do_iter_write+0x18e/0x2d0 [ 9.485987] ? __import_iovec+0x30/0x130 [ 9.485997] ? do_pwritev+0x1b6/0x240 [ 9.486016] ? trace_hardirqs_on+0x47/0x50 [ 9.486023] ? __x64_sys_pwritev+0x24/0x30 [ 9.486026] ? do_syscall_64+0x3d/0x80 [ 9.486031] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd Flow dissector tries to find skb net namespace either via device or via socket. Neigher is set in ppp_send_frame, so let's manually use ppp->dev. | ||||
| CVE-2022-50812 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 A bad bug in clang's implementation of -fzero-call-used-regs can result in NULL pointer dereferences (see the links above the check for more information). Restrict CONFIG_CC_HAS_ZERO_CALL_USED_REGS to either a supported GCC version or a clang newer than 15.0.6, which will catch both a theoretical 15.0.7 and the upcoming 16.0.0, which will both have the bug fixed. | ||||
| CVE-2022-50854 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: virtual_ncidev: Fix memory leak in virtual_nci_send() skb should be free in virtual_nci_send(), otherwise kmemleak will report memleak. Steps for reproduction (simulated in qemu): cd tools/testing/selftests/nci make ./nci_dev BUG: memory leak unreferenced object 0xffff888107588000 (size 208): comm "nci_dev", pid 206, jiffies 4294945376 (age 368.248s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000008d94c8fd>] __alloc_skb+0x1da/0x290 [<00000000278bc7f8>] nci_send_cmd+0xa3/0x350 [<0000000081256a22>] nci_reset_req+0x6b/0xa0 [<000000009e721112>] __nci_request+0x90/0x250 [<000000005d556e59>] nci_dev_up+0x217/0x5b0 [<00000000e618ce62>] nfc_dev_up+0x114/0x220 [<00000000981e226b>] nfc_genl_dev_up+0x94/0xe0 [<000000009bb03517>] genl_family_rcv_msg_doit.isra.14+0x228/0x2d0 [<00000000b7f8c101>] genl_rcv_msg+0x35c/0x640 [<00000000c94075ff>] netlink_rcv_skb+0x11e/0x350 [<00000000440cfb1e>] genl_rcv+0x24/0x40 [<0000000062593b40>] netlink_unicast+0x43f/0x640 [<000000001d0b13cc>] netlink_sendmsg+0x73a/0xbf0 [<000000003272487f>] __sys_sendto+0x324/0x370 [<00000000ef9f1747>] __x64_sys_sendto+0xdd/0x1b0 [<000000001e437841>] do_syscall_64+0x3f/0x90 | ||||
| CVE-2023-53853 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netlink: annotate accesses to nlk->cb_running Both netlink_recvmsg() and netlink_native_seq_show() read nlk->cb_running locklessly. Use READ_ONCE() there. Add corresponding WRITE_ONCE() to netlink_dump() and __netlink_dump_start() syzbot reported: BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0: __netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399 netlink_dump_start include/linux/netlink.h:308 [inline] rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] sock_write_iter+0x1aa/0x230 net/socket.c:1138 call_write_iter include/linux/fs.h:1851 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x463/0x760 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1: netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022 sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017 ____sys_recvmsg+0x2db/0x310 net/socket.c:2718 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00 -> 0x01 | ||||
| CVE-2022-50858 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: alcor: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path. | ||||
| CVE-2022-50870 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: avoid device tree lookups in rtas_os_term() rtas_os_term() is called during panic. Its behavior depends on a couple of conditions in the /rtas node of the device tree, the traversal of which entails locking and local IRQ state changes. If the kernel panics while devtree_lock is held, rtas_os_term() as currently written could hang. Instead of discovering the relevant characteristics at panic time, cache them in file-static variables at boot. Note the lookup for "ibm,extended-os-term" is converted to of_property_read_bool() since it is a boolean property, not an RTAS function token. [mpe: Incorporate suggested change from Nick] | ||||
| CVE-2025-40305 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: 9p/trans_fd: p9_fd_request: kick rx thread if EPOLLIN p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq) if list_empty(&m->req_list). However, if the pipe is full, we need to read more data and this used to work prior to commit aaec5a95d59615 ("pipe_read: don't wake up the writer if the pipe is still full"). p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before the commit above) triggered the unnecessary wakeup. This wakeup calls p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux() will notice EPOLLIN and schedule_work(&m->rq). This no longer happens after the optimization above, change p9_fd_request() to use p9_poll_mux() instead of only checking for EPOLLOUT. | ||||
| CVE-2022-50887 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix unbalanced of node refcount in regulator_dev_lookup() I got the the following report: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@62/regulators/exten In of_get_regulator(), the node is returned from of_parse_phandle() with refcount incremented, after using it, of_node_put() need be called. | ||||
| CVE-2023-54224 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix lockdep splat and potential deadlock after failure running delayed items When running delayed items we are holding a delayed node's mutex and then we will attempt to modify a subvolume btree to insert/update/delete the delayed items. However if have an error during the insertions for example, btrfs_insert_delayed_items() may return with a path that has locked extent buffers (a leaf at the very least), and then we attempt to release the delayed node at __btrfs_run_delayed_items(), which requires taking the delayed node's mutex, causing an ABBA type of deadlock. This was reported by syzbot and the lockdep splat is the following: WARNING: possible circular locking dependency detected 6.5.0-rc7-syzkaller-00024-g93f5de5f648d #0 Not tainted ------------------------------------------------------ syz-executor.2/13257 is trying to acquire lock: ffff88801835c0c0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 but task is already holding lock: ffff88802a5ab8e8 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_lock+0x3c/0x2a0 fs/btrfs/locking.c:198 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-tree-00){++++}-{3:3}: __lock_release kernel/locking/lockdep.c:5475 [inline] lock_release+0x36f/0x9d0 kernel/locking/lockdep.c:5781 up_write+0x79/0x580 kernel/locking/rwsem.c:1625 btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline] btrfs_unlock_up_safe+0x179/0x3b0 fs/btrfs/locking.c:239 search_leaf fs/btrfs/ctree.c:1986 [inline] btrfs_search_slot+0x2511/0x2f80 fs/btrfs/ctree.c:2230 btrfs_insert_empty_items+0x9c/0x180 fs/btrfs/ctree.c:4376 btrfs_insert_delayed_item fs/btrfs/delayed-inode.c:746 [inline] btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline] __btrfs_commit_inode_delayed_items+0xd24/0x2410 fs/btrfs/delayed-inode.c:1111 __btrfs_run_delayed_items+0x1db/0x430 fs/btrfs/delayed-inode.c:1153 flush_space+0x269/0xe70 fs/btrfs/space-info.c:723 btrfs_async_reclaim_metadata_space+0x106/0x350 fs/btrfs/space-info.c:1078 process_one_work+0x92c/0x12c0 kernel/workqueue.c:2600 worker_thread+0xa63/0x1210 kernel/workqueue.c:2751 kthread+0x2b8/0x350 kernel/kthread.c:389 ret_from_fork+0x2e/0x60 arch/x86/kernel/process.c:145 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3142 [inline] check_prevs_add kernel/locking/lockdep.c:3261 [inline] validate_chain kernel/locking/lockdep.c:3876 [inline] __lock_acquire+0x39ff/0x7f70 kernel/locking/lockdep.c:5144 lock_acquire+0x1e3/0x520 kernel/locking/lockdep.c:5761 __mutex_lock_common+0x1d8/0x2530 kernel/locking/mutex.c:603 __mutex_lock kernel/locking/mutex.c:747 [inline] mutex_lock_nested+0x1b/0x20 kernel/locking/mutex.c:799 __btrfs_release_delayed_node+0x9a/0xaa0 fs/btrfs/delayed-inode.c:256 btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline] __btrfs_run_delayed_items+0x2b5/0x430 fs/btrfs/delayed-inode.c:1156 btrfs_commit_transaction+0x859/0x2ff0 fs/btrfs/transaction.c:2276 btrfs_sync_file+0xf56/0x1330 fs/btrfs/file.c:1988 vfs_fsync_range fs/sync.c:188 [inline] vfs_fsync fs/sync.c:202 [inline] do_fsync fs/sync.c:212 [inline] __do_sys_fsync fs/sync.c:220 [inline] __se_sys_fsync fs/sync.c:218 [inline] __x64_sys_fsync+0x196/0x1e0 fs/sync.c:218 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that ---truncated--- | ||||