Export limit exceeded: 22892 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22892 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68357 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: pretimeout: Fix UAF in watchdog_unregister_governor() When a watchdog governor is unregistered, it updates existing watchdog devices that were using this governor by falling back to `default_gov`. If the governor being unregistered is currently set as `default_gov`, the `default_gov` is never cleared. This leads to 2 use-after-free issues: 1. New watchdog devices registered after this point will inherit the dangling `default_gov`. 2. Existing watchdog devices using the unregistered governor will have their `wdd->gov` reassigned to the dangling `default_gov`. Fix the UAF by clearing `default_gov` if it matches the governor being unregistered. | ||||
| CVE-2026-68355 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix potential buffer underflow in ath11k_hal_rx_msdu_list_get() When the first entry in msdu_details has a zero buffer address, the code accesses msdu_details[i - 1] with i == 0, causing a buffer underflow. Fix similarly to ath12k_wifi7_hal_rx_msdu_list_get() by adding a separate check for i == 0 before the main condition to prevent the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-68354 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firewire: net: Fix fragmented datagram reassembly fwnet_frag_new() keeps a sorted list of received fragments for a partial datagram. When a new fragment is adjacent to an existing fragment, the code checks whether the new fragment also closes the gap to the next or previous list entry. Those neighbor lookups currently assume that the current fragment always has a real next or previous fragment. At a list edge, the next or previous entry is the list head, not a struct fwnet_fragment_info. The gap checks also compare against the old edge of the current fragment instead of the edge after adding the new fragment. As a result, a fragment that bridges two existing ranges may leave two adjacent ranges unmerged, so fwnet_pd_is_complete() can miss a complete datagram. Check for the list head before looking up the neighboring fragment, and compare the neighbor against the new fragment's far edge when deciding whether to merge all three ranges. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68353 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries. | ||||
| CVE-2026-68352 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.3 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware IE lengths in connect event The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len fields in ath6kl_wmi_connect_event_rx() are not validated against the buffer length. Their sum (up to 765) can exceed the actual WMI event data, causing out-of-bounds reads during IE parsing and state corruption of wmi->is_wmm_enabled. Add a check that the total IE length fits within the buffer. | ||||
| CVE-2026-68351 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read When the firmware sends a command response with a length mismatch, carl9170_cmd_callback() logs the mismatch and calls carl9170_restart() but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4). Since len comes from the firmware and can exceed ar->readlen, this copies more data than the readbuf was allocated for. Bound the memcpy to min(len - 4, ar->readlen) so that the response is still completed -- avoiding repeated restarts from queued garbage -- while preventing an overread past the response buffer. | ||||
| CVE-2026-68350 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`. | ||||
| CVE-2026-68349 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix buffer overflow in rx_stream failover path The failover continuation in carl9170_rx_stream() copies the full tlen from the second USB transfer instead of capping at rx_failover_missing bytes. When both transfers are near maximum size, the total exceeds the 65535-byte failover SKB, triggering skb_over_panic. Limit the copy size to the missing byte count. [Fix checkpatch CHECK:PARENTHESIS_ALIGNMENT] | ||||
| CVE-2026-68344 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: atm: ueagle-atm: reject descriptors that confuse probe and disconnect uea_probe() distinguishes a pre-firmware device from a post-firmware one using the USB id (UEA_IS_PREFIRM()), and stores a different object as the interface data in each case: a 'struct completion' for a pre-firmware device (to be waited on in .disconnect()), or a 'struct usbatm_data' for a post-firmware one. uea_disconnect() instead tells the two apart by the number of interfaces of the active configuration (a pre-firmware device exposes a single interface, ADI930 has 2 and eagle has 3), and casts the interface data accordingly. Because the two handlers use different criteria, a crafted device that advertises a pre-firmware id together with a multi-interface descriptor (or a post-firmware id with a single interface) makes them disagree: the small 'struct completion' stored by uea_probe() is then passed to usbatm_usb_disconnect(), which casts it to 'struct usbatm_data' and takes instance->serialize, reading past the end of the allocation: BUG: KASAN: slab-out-of-bounds in __mutex_lock+0x152a/0x1b80 Read of size 8 at addr ffff8880470e2c60 by task kworker/1:2/982 ... __mutex_lock+0x152a/0x1b80 usbatm_usb_disconnect+0x70/0x820 uea_disconnect+0x133/0x2c0 usb_unbind_interface+0x1dd/0x9e0 ... which belongs to the cache kmalloc-96 of size 96 The buggy address is located 0 bytes to the right of allocated 96-byte region [ffff8880470e2c00, ffff8880470e2c60) Reject such inconsistent descriptors in uea_probe() so that both handlers always make the same pre/post-firmware decision. | ||||
| CVE-2026-68343 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate DFS referral PathConsumed parse_dfs_referrals() validates that the response contains the fixed referral entry array and, on for-next, the per-referral string offsets. However, the response also contains a PathConsumed value that is later used for DFS path parsing. If a malformed response provides a PathConsumed value larger than the search name, later DFS parsing can advance beyond the end of the path. Validate PathConsumed against the search name length before storing it in the parsed referral. | ||||
| CVE-2026-68340 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: occ: validate poll response sensor blocks The OCC poll response parser walks a counted list of sensor data blocks. It used the static backing-array capacity as the parse boundary, but a transport response makes only data_length bytes current and valid. A truncated response can therefore make the parser consume a block header or block extent outside the current response. Use data_length as the parent boundary, prove the fixed poll header and each current block header before reading them, and prove the complete block before advancing. Keep parsed sensor metadata local until the complete response has passed validation, then publish it. Propagate malformed-response errors before publishing the OCC as active. | ||||
| CVE-2026-68338 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: avoid fanout hook re-registration after unregister packet_set_ring() temporarily detaches a socket from packet delivery while reconfiguring its ring. It records the previous running state, clears po->num, unregisters the protocol hook when needed, drops po->bind_lock, and later restores po->num and re-registers the hook from the saved was_running value. That unlocked window can race with NETDEV_UNREGISTER. The notifier can observe the socket as not running, skip __unregister_prot_hook(), and invalidate the per-socket binding by setting po->ifindex to -1 and clearing po->prot_hook.dev. A one-member fanout group can still retain its shared fanout hook device pointer. When packet_set_ring() resumes, re-registering solely from the stale was_running state can re-add the fanout hook after the device has been unregistered. Treat po->ifindex == -1 as an invalidated binding after reacquiring po->bind_lock. This is distinct from ifindex 0, the normal unbound/wildcard state: ifindex -1 marks an existing device binding that was invalidated when the device was unregistered. Restore po->num as before, but do not re-register the hook if device unregister already detached the socket. | ||||
| CVE-2026-68336 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix devconf_all NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the devconf_all is never initialized because inet6_init() exits before addrconf_init() is called which initializes it. bond_send_validate(), however, will still call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to NULL derefence of net->ipv6.devconf_all in ip6_pol_route(). BUG: kernel NULL pointer dereference, address: 000000000000000c [...] Workqueue: bond0 bond_arp_monitor [bonding] RIP: 0010:ip6_pol_route+0x69/0x480 [...] Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f ? __pfx_ip6_pol_route_output+0x10/0x10 fib6_rule_lookup+0xfe/0x260 ? wakeup_preempt+0x8a/0x90 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? sched_balance_rq+0x369/0x810 ip6_route_output_flags+0xd7/0x170 bond_ns_send_all+0xde/0x280 [bonding] bond_ab_arp_probe+0x296/0x320 [bonding] ? srso_return_thunk+0x5/0x5f bond_activebackup_arp_mon+0xb4/0x2c0 [bonding] process_one_work+0x196/0x370 worker_thread+0x1af/0x320 ? srso_return_thunk+0x5/0x5f ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x199/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by adding ipv6_mod_enabled() condition check in the caller. | ||||
| CVE-2026-68335 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looks up the destination socket using a global rhashtable keyed solely on (addr, port, scope_id). Network namespaces are not part of the key, so a sender in netns A can deliver an incoming message (inc) to a socket that lives in a different netns B. When this happens, inc->i_conn points to an rds_connection whose c_net is netns A, but the receiving rs lives in netns B. Once the child process that created netns A exits, cleanup_net() calls rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(), freeing that connection. If the survivor socket in netns B still holds the inc, any subsequent dereference of inc->i_conn is a use-after-free. There are two dangerous sites in rds_clear_recv_queue(): 1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200) read via rds_recv_rcvbuf_delta() -- confirmed by KASAN. 2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80) called via rds_inc_put() when the inc refcount reaches zero -- same race window, potential call-through-freed-object primitive. The bug is reachable from unprivileged user namespaces (CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8. Fix this by rejecting the delivery in rds_recv_incoming() when the socket returned by rds_find_bound() belongs to a different network namespace than the connection that carried the message. Use the existing rds_conn_net() / sock_net() helpers and net_eq() for the comparison. | ||||
| CVE-2026-68333 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object. | ||||
| CVE-2026-68331 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object. | ||||
| CVE-2026-68328 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfp: Check resource mutex allocation nfp_cpp_resource_find() allocates a CPP mutex handle for the matching resource-table entry and then reports success. nfp_resource_try_acquire() immediately passes that handle to nfp_cpp_mutex_trylock(). However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens for a matching table entry, the resource lookup still returns success and the following trylock dereferences a NULL mutex pointer while opening the resource. nfp_resource_acquire() already treats failure to allocate the table mutex as -ENOMEM. Do the same for the resource mutex and fail the lookup before publishing the rest of the resource handle. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68327 | 1 Linux | 1 Linux Kernel | 2026-08-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wan: wanxl: Only reset hardware after BAR mapping wanxl_pci_init_one() stores the freshly allocated card in driver data before the PLX BAR is mapped. Several early probe failures then unwind through wanxl_pci_remove_one(), including failure to allocate the coherent status area or to restore the DMA mask. wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and wanxl_reset() dereferences card->plx. On those early failures card->plx is still NULL, so the error path can dereference a NULL MMIO pointer. Only issue the hardware reset once the BAR mapping exists. The remaining cleanup in wanxl_pci_remove_one() already checks whether later resources were allocated. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68326 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound uAP association event IEs to the event buffer mwifiex_process_uap_event() handles EVENT_UAP_STA_ASSOC by exposing the (re)association request IEs that the firmware copies into the event: sinfo->assoc_req_ies = &event->data[len]; len = (u8 *)sinfo->assoc_req_ies - (u8 *)&event->frame_control; sinfo->assoc_req_ies_len = le16_to_cpu(event->len) - (u16)len; event->len is supplied by the device firmware and is never validated, and the subtraction is unchecked. assoc_req_ies points into adapter->event_body[MAX_EVENT_SIZE], a fixed-size array embedded in the kmalloc()'d struct mwifiex_adapter. On the ap_11n_enabled path mwifiex_set_sta_ht_cap() walks these IEs with cfg80211_find_ie(), whose for_each_element() loop dereferences each element header. A firmware-reported event->len larger than the bytes actually received makes assoc_req_ies_len describe IEs that extend past event_body, so the walk reads out of the adapter slab object, a slab-out-of-bounds read (KASAN: slab-out-of-bounds in cfg80211_find_ie). An event->len smaller than the header instead makes the int subtraction negative, which wraps to a huge size_t when stored in assoc_req_ies_len. The same length is handed to cfg80211_new_sta(), so a more modest over-claim can also copy stale event_body bytes into the NL80211_CMD_NEW_STATION notification. A malicious or malfunctioning mwifiex device (USB/SDIO/PCIe) can deliver such an event while the interface is in AP/uAP mode. Validate event->len before use: reject a length that underflows the header or that would place the IEs outside the event_body[] buffer the event was copied into. event->len here is struct mwifiex_assoc_event.len, a payload field internal to this event, not the transport frame length, so it is validated in this handler rather than at the generic MWIFIEX_TYPE_EVENT receive path, which only sees the event cause and the transport frame length. The bound is against event_body[MAX_EVENT_SIZE] rather than the actually-received length because the transports store the event differently (USB and SDIO leave the 4-byte event header in event_skb, PCIe strips it via skb_pull), whereas event_body is the single fixed buffer all of them copy the event into. This is the event-path analogue of the receive-path bounds checks added in commit 119585281617 ("wifi: mwifiex: Fix OOB and integer underflow when rx packets"). | ||||
| CVE-2026-68325 | 1 Linux | 1 Linux Kernel | 2026-08-19 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bound the early ACPI HID map The ivrs_acpihid command-line parser appends entries to a fixed four-element early_acpihid_map array. Unlike the sibling IOAPIC and HPET parsers, it does not reject a fifth entry before incrementing the map size. Check the capacity at the common found label before parsing the HID and UID or writing the entry. | ||||