Export limit exceeded: 370647 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370647 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64338 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-64341 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||
| CVE-2026-64342 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler. | ||||
| CVE-2026-64344 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked") | ||||
| CVE-2026-64359 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230 The writer holding ns_segctor_sem was a concurrent NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting per-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_clean_segments+0x3bd/0xa50 nilfs_ioctl_clean_segments fs/nilfs2/ioctl.c:922 [inline] nilfs_ioctl+0x261f/0x2780 The root cause is that user-supplied segment numbers are not validated before nilfs_clean_segments() begins doing work; the range check on each segnum is performed deep inside the call chain by nilfs_sufile_updatev(), which emits a nilfs_warn() per invalid entry while still holding the segctor lock and the sufile mi_sem. Under load (repeated invocations across multiple mounts saturating the global printk path), the cumulative printk latency keeps ns_segctor_sem held long enough to trip the hung_task watchdog, blocking concurrent operations such as chmod() that need ns_segctor_sem for read. Fix by validating the contents of kbufs[4] in nilfs_clean_segments() immediately after acquiring ns_segctor_sem via nilfs_transaction_lock(). Holding ns_segctor_sem serializes the check against nilfs_ioctl_resize(), which can modify ns_nsegments, so the validation uses a consistent value. Out-of-range segment numbers are rejected with -EINVAL before any segment-cleaning work begins, so the bad entries never reach the per-element diagnostic path inside nilfs_sufile_updatev(). | ||||
| CVE-2026-64363 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereference appleir->input_dev. Introduce a 'removing' flag on struct appleir, gated by the existing spinlock. appleir_remove() sets the flag under the lock and then shuts down the timer with timer_shutdown_sync(), which both drains any in-flight callback and permanently disables further mod_timer() calls. appleir_raw_event() and key_up_tick() bail out early if the flag is set, so no path can arm or run the timer, or dereference appleir->input_dev, after remove() has started tearing down. The keyrepeat and flatbattery branches of appleir_raw_event() previously called into the input layer without holding the spinlock; take it now so the flag check is well-defined. This incidentally closes a pre-existing read-side race on appleir->current_key in the keyrepeat branch. This bug is structurally a sibling of commit 4db2af929279 ("HID: appletb-kbd: fix UAF in inactivity-timer cleanup path") and has been present since the driver was introduced. | ||||
| CVE-2026-64365 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: letsketch: fix UAF on inrange_timer at driver unbind letsketch_driver does not provide a .remove callback, but letsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0); The timer is re-armed from letsketch_raw_event() with a 100 ms timeout on every pen-in-range report, and its callback dereferences data->input_tablet to deliver a synthetic BTN_TOOL_PEN release. letsketch_data is allocated with devm_kzalloc(), and its input_dev fields are devm-allocated via letsketch_setup_input_tablet(). On device unbind (USB unplug or rmmod), the HID core runs its default teardown and devm cleanup frees both letsketch_data and the input devices. Because no .remove callback exists, nothing drains the timer first: if raw_event armed it within ~100 ms of the unbind, the pending timer fires on freed memory. This is a UAF read of data and of data->input_tablet, followed by input_report_key() / input_sync() into the freed input_dev. The same problem can occur on the probe error path: if hid_hw_start() enabled I/O on an always-poll-quirk device and then failed, raw_event may have armed the timer before devm releases data. Fix by adding a .remove callback that calls hid_hw_stop() first. hid_hw_stop() synchronously kills the URBs that deliver raw_event(), so once it returns no path can re-arm the timer. timer_shutdown_sync() then drains any in-flight callback and permanently disables further mod_timer() calls. Apply the same timer_shutdown_sync() in the probe error path so the timer is guaranteed not to outlive data. | ||||
| CVE-2026-64369 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390: Revert support for DCACHE_WORD_ACCESS load_unaligned_zeropad() reads eight bytes from unaligned addresses and may cross page boundaries. It handles exceptions which may happen if reading from the second page results in an exception. For pages which are donated to the Ultravisor for secure execution purposes the do_secure_storage_access() exception handler however does not handle such exceptions correctly. Such an exception may result in an endless exception loop which will never be resolved. An attempt to fix this [1] turned out to be not sufficient. For now revert load_unaligned_zeropad() until this problem has been resolved in a proper way. Note that the implementation of load_unaligned_zeropad() itself is correct. The revert is just a temporary workaround until there is complete fix for secure storage access exceptions. [1] commit b00be77302d7 ("s390/mm: Add missing secure storage access fixups for donated memory") | ||||
| CVE-2026-64373 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: Fix hotplug-suspend race during reboot During system reboot, cpufreq_suspend() is called via the kernel_restart() -> device_shutdown() path. Unlike the normal system suspend path, the reboot path does not call freeze_processes(), so userspace processes and kernel threads remain active. This allows CPU hotplug operations to run concurrently with cpufreq_suspend(). The original code has no synchronization with CPU hotplug, leading to a race condition where governor_data can be freed by the hotplug path while cpufreq_suspend() is still accessing it, resulting in a null pointer dereference: Unable to handle kernel NULL pointer dereference Call Trace: do_kernel_fault+0x28/0x3c cpufreq_suspend+0xdc/0x160 device_shutdown+0x18/0x200 kernel_restart+0x40/0x80 arm64_sys_reboot+0x1b0/0x200 Fix this by adding cpus_read_lock()/cpus_read_unlock() to cpufreq_suspend() to block CPU hotplug operations while suspend is in progress. [ rjw: Changelog edits ] | ||||
| CVE-2026-64376 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware_loader: fix device reference leak in firmware_upload_register() firmware_upload_register() -> fw_create_instance() -> device_initialize() After fw_create_instance() succeeds, the lifetime of the embedded struct device is expected to be managed through the device core reference counting, since fw_create_instance() has already called device_initialize(). In firmware_upload_register(), if alloc_lookup_fw_priv() fails after fw_create_instance() succeeds, the code reaches free_fw_sysfs and frees fw_sysfs directly instead of releasing the device reference with put_device(). This may leave the reference count of the embedded struct device unbalanced, resulting in a refcount leak. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix this by using put_device(fw_dev) in the failure path and letting fw_dev_release() handle the final cleanup, instead of freeing the instance directly from the error path. | ||||
| CVE-2026-64377 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom-cpufreq-hw: Fix possible double free qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to one element of this array in policy->driver_data. qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data. This is not valid because the memory is devm-managed. For the first domain, this can free the devm-managed allocation while the devres entry is still active, leading to a possible double free when the platform device is later detached. For other domains, the pointer may refer to an element inside the array rather than the allocation base. Remove the kfree(data) call and let devres release qcom_cpufreq.data. This issue was found by a static analysis tool I am developing. | ||||
| CVE-2026-64405 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn() hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection was pending, but hdev->sent_cmd can be NULL while req_status is still HCI_REQ_PEND, leading to a NULL pointer dereference and a general protection fault from the hci_rx_work() receive path. Instead of inspecting hdev->sent_cmd, track the in-flight create connection command with a new per-connection HCI_CONN_CREATE flag and route all cancellation through hci_cancel_connect_sync(), which dispatches to a dedicated per-type cancel function. The create command is in exactly one of two states: still queued, or in flight. The cancel function holds cmd_sync_work_lock across the whole decision: the worker takes this lock to dequeue every entry, so while it is held a queued command cannot start running and an in-flight command cannot complete and let the next command become pending. This keeps the flag test and hci_cmd_sync_cancel() atomic with respect to the worker, so a queued command is simply dequeued, and an in-flight command owned by this connection is cancelled without the risk of cancelling an unrelated command that became pending in the meantime. CIS uses the same flag mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection. hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear HCI_CONN_CREATE after the create command completes, but the command status handler can free conn via hci_conn_del() (for example when the controller rejects the connection) while the worker is still blocked on the connection complete event. Hold a reference on conn across the create command so the flag can be cleared without a use-after-free. | ||||
| CVE-2026-64417 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix NULL pointer dereference in debugfs shrinker_debugfs_add() creates both "count" and "scan" debugfs files unconditionally. That assumes every shrinker implements both count_objects() and scan_objects(), which is not guaranteed. For example, the xen-backend shrinker sets count_objects() but leaves scan_objects() NULL, so writing to its scan file calls through a NULL function pointer and panics the kernel: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. Call Trace: <TASK> shrinker_debugfs_scan_write+0x12e/0x270 full_proxy_write+0x5f/0x90 vfs_write+0xde/0x420 ? filp_flush+0x75/0x90 ? filp_close+0x1d/0x30 ? do_dup2+0xb8/0x120 ksys_write+0x68/0xf0 ? filp_flush+0x75/0x90 do_syscall_64+0xb3/0x5b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The count path has the same issue in principle if a shrinker omits count_objects(). To fix it, only create "count" and "scan" debugfs files when the corresponding callbacks are present. | ||||
| CVE-2026-64419 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show() Reading the debugfs "count" file of a memcg-aware shrinker can sleep inside an RCU read-side critical section: BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421 RCU nest depth: 1, expected: 0 css_rstat_flush mem_cgroup_flush_stats zswap_shrinker_count shrinker_debugfs_count_show shrinker_debugfs_count_show() invokes the ->count_objects() callback under rcu_read_lock(). The zswap callback flushes memcg stats via css_rstat_flush(), which may sleep, so it must not run under RCU. The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally and returns a memcg holding a css reference (dropped on the next iteration or by mem_cgroup_iter_break()), so the memcg stays alive without it. The shrinker is kept alive by the open debugfs file: shrinker_free() removes the debugfs entries via debugfs_remove_recursive(), which waits for in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb). The sibling "scan" handler already invokes the sleeping ->scan_objects() callback with no RCU section. Drop the rcu_read_lock()/rcu_read_unlock(). | ||||
| CVE-2026-64426 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/nop: fix file reference leak with IOSQE_FIXED_FILE NOP file-acquisition support choses between a fixed (registered) file and a normal fget()'d file based on its own IORING_NOP_FIXED_FILE flag in sqe->nop_flags. However, a request's REQ_F_FIXED_FILE is set independently from the generic IOSQE_FIXED_FILE sqe flag during request init, before the issue handler runs. If a NOP is submitted with IOSQE_FIXED_FILE set (so REQ_F_FIXED_FILE is set) but without IORING_NOP_FIXED_FILE, io_nop() takes the normal path and grabs a real reference via io_file_get_normal(). On completion, io_put_file() only drops the reference when REQ_F_FIXED_FILE is clear, so the fget()'d file is never released and leaks: BUG: memory leak unreferenced object 0xffff88800f42c240 (size 176): kmem_cache_alloc_noprof+0x358/0x440 alloc_empty_file+0x57/0x180 path_openat+0x44/0x1e50 do_file_open+0x121/0x200 do_sys_openat2+0xa7/0x150 __x64_sys_openat+0x82/0xf0 Decide between fixed and normal file acquisition from REQ_F_FIXED_FILE, the same way io_assign_file() does for every other opcode, and fold IORING_NOP_FIXED_FILE into REQ_F_FIXED_FILE at prep time. | ||||
| CVE-2026-64433 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete add_device_complete() runs from the hci_cmd_sync_work kworker, which holds only hci_req_sync_lock and *not* hci_dev_lock. It calls hci_conn_params_lookup() and then dereferences the returned object (params->flags) without taking hci_dev_lock: params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr, le_addr_type(cp->addr.type)); ... device_flags_changed(NULL, hdev, &cp->addr.bdaddr, cp->addr.type, hdev->conn_flags, params ? params->flags : 0); hci_conn_params_lookup() walks hdev->le_conn_params and is documented to require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE (remove_device()), which does run under hci_dev_lock, can call hci_conn_params_free() to list_del() and kfree() the very object the lookup returned, so the subsequent params->flags read touches freed memory [0]. Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of params->flags (and the matching event emission) so the lookup result cannot be freed by a concurrent remove_device() before it is used, honouring the locking contract of hci_conn_params_lookup(). [0]: (trailing page/memory-state dump trimmed) BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388 CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT Hardware name: linux,dummy-virt (DT) Workqueue: hci0 hci_cmd_sync_work Call trace: show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x118/0x5d8 mm/kasan/report.c:482 kasan_report+0xb0/0xf4 mm/kasan/report.c:595 __asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378 add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671 hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334 process_one_work+0x628/0xd38 kernel/workqueue.c:3289 process_scheduled_works kernel/workqueue.c:3372 [inline] worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453 kthread+0x39c/0x444 kernel/kthread.c:436 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Allocated by task 3401: kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57 kasan_save_track+0x20/0x3c mm/kasan/common.c:78 kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279 hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline] add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755 hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline] hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0xe0/0x128 net/socket.c:742 sock_write_iter+0x250/0x390 net/socket.c:1195 new_sync_write fs/read_write.c:595 [inline] vfs_write+0x66c/0xab0 fs/read_write.c:688 ksys_write+0x1fc/0x24c fs/read_write.c:740 __do_sys_write fs/read_write.c:751 [inline] __se_sys_write fs/read_write.c:748 [inline] __arm64_sys_write+0x70/0xa4 fs/read_write.c:748 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49 el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151 el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724 el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596 Freed by task 3740: kasan_save_stack+0x3c/0x64 ---truncated--- | ||||
| CVE-2026-64454 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: run gadget disconnect from sleepable suspend context dwc3_gadget_suspend() takes dwc->lock with IRQs disabled and then calls dwc3_disconnect_gadget(). For async callbacks that helper only uses plain spin_unlock()/spin_lock(), so the gadget ->disconnect() callback still runs with IRQs disabled and any sleepable callback trips Lockdep. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the dwc3_gadget_suspend() -> dwc3_disconnect_gadget() -> gadget_driver->disconnect() chain, and Lockdep reported: BUG: sleeping function called from invalid context gadget_disconnect+0x21/0x39 [vuln_msv] dwc3_gadget_suspend.constprop.0+0x2b/0x42 [vuln_msv] Keep the disconnect callback selection in one common helper, but add a sleepable suspend-side wrapper which snapshots the callback under dwc->lock and then runs it after spin_unlock_irqrestore(). The regular event path still uses the existing spin_unlock()/spin_lock() window. | ||||
| CVE-2026-64458 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: handle extreme intervals in damon_hot_score() Fix three issues in damon_hot_score() that comes from wrong handling of extreme (zero or too high) monitoring intervals user setup. When the user sets sampling interval zero, damon_max_nr_accesses(), which is called from damon_hot_score(), causes a divide-by-zero. Needless to say, it is a problem. When the user sets the aggregation interval zero, the function returns zero. It is wrong, since the real maximum nr_acceses in the setup should be one. Worse yet, it can cause another divide-by-zero from its caller, damon_hot_score(), since it uses damon_max_nr_accesses() return value as a denominator. When the user sets the aggregation interval very high, damon_hot_score() could return a value out of [0, DAMOS_MAX_SCORE] range. Since the return value is used as an index to the regions_score_histogram array, which is DAMOS_MAX_SCORE+1 size, it causes out of bounds array access. The issues can be relatively easily reproduced like below. The sysfs write permission is required, though. # ./damo start --damos_action lru_prio --damos_quota_space 100M \ --damos_quota_interval 1s # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/monitoring_attrs/intervals/sample_us # echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us # echo commit > state # dmesg [...] [ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI [...] [ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0 [...] Fix the divide-by-zero intervals problems by explicitly handling the zero intervals in damon_max_nr_accesses(). Fix the out-of-bound array access by applying [0, DAMOS_MAX_SCORE] bounds before returning from damon_hot_score(). The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-64478 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device preserves the check without dereferencing kobject names during disconnect. | ||||
| CVE-2026-64479 | 1 Linux | 1 Linux Kernel | 2026-07-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup() snd_seq_event_dup() copies an incoming event into a pool cell and, in the UMP-enabled build, clears the trailing cell->ump.raw.extra word that the memcpy() did not cover. The guard deciding whether to clear it compares the copied size against sizeof(cell->event): memcpy(&cell->ump, event, size); if (size < sizeof(cell->event)) cell->ump.raw.extra = 0; For a legacy (non-UMP) event, size == sizeof(struct snd_seq_event) == sizeof(cell->event), so the condition is false and the extra word keeps stale data. The cell pool is allocated with kvmalloc() (not zeroed) and cells are reused via a free list, so that word holds uninitialised heap or leftover event data. When such a cell is delivered to a UMP client (client->midi_version > 0) that set SNDRV_SEQ_FILTER_NO_CONVERT -- so the legacy event reaches it unconverted -- snd_seq_read() reads it out as the larger struct snd_seq_ump_event and copies the stale word to user space, a 4-byte kernel heap infoleak to an unprivileged /dev/snd/seq client. Compare against sizeof(cell->ump) instead, so the trailing word is zeroed for every event shorter than the UMP cell. | ||||