Export limit exceeded: 372008 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (372008 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-11694 | 1 Rockwellautomation | 1 Compactlogix 5370 | 2026-06-16 | N/A |
| A security issue exists within 1769 CompactLogix controllers due to the missing validation of sequence numbers and source IP addresses in the CIP protocol. This allows attacker to abuse the exposed Connection ID’s visible on the web interface to perform denial-of-service attacks, resulting in a minor fault. | ||||
| CVE-2026-9307 | 1 Rockwellautomation | 1 Compactlogix 5370 | 2026-06-16 | N/A |
| A sensitive information disclosure security issue exists within the affected CompactLogix controllers. The controller's web server exposes CIP Connection IDs on the diagnostics webpage, which are accessible to any unauthenticated user on the network. This information can be leveraged by an attacker to construct malicious packets, leading to Denial-of-Service. | ||||
| CVE-2024-45636 | 1 Ibm | 1 Security Qradar Edr | 2026-06-16 | 4.1 Medium |
| IBM Security QRadar EDR 3.12 through 3.12.24 stores user credentials in plain text which can be read by a local privileged user. | ||||
| CVE-2025-68312 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: Prevents free active kevent The root cause of this issue are: 1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0); put the kevent work in global workqueue. However, the kevent has not yet been scheduled when the usbnet device is unregistered. Therefore, executing free_netdev() results in the "free active object (kevent)" error reported here. 2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(), if the usbnet device is up, ndo_stop() is executed to cancel the kevent. However, because the device is not up, ndo_stop() is not executed. The solution to this problem is to cancel the kevent before executing free_netdev(). | ||||
| CVE-2026-3341 | 2 Ibm, Langflow | 2 Langflow Desktop, Langflow Desktop | 2026-06-16 | 5.4 Medium |
| IBM Langflow Desktop 1.0.0 through 1.9.2 IBM Langflow is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. | ||||
| CVE-2026-4096 | 1 Ibm | 1 Devops Plan | 2026-06-16 | 6.5 Medium |
| IBM DevOps Plan 3.0.0 through 3.0.6 is vulnerable to HTTP header injection, caused by improper validation of input by the HOST headers. This could allow an attacker to conduct various attacks against the vulnerable system, including cross-site scripting, cache poisoning or session hijacking | ||||
| CVE-2025-68788 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fsnotify: do not generate ACCESS/MODIFY events on child for special files inotify/fanotify do not allow users with no read access to a file to subscribe to events (e.g. IN_ACCESS/IN_MODIFY), but they do allow the same user to subscribe for watching events on children when the user has access to the parent directory (e.g. /dev). Users with no read access to a file but with read access to its parent directory can still stat the file and see if it was accessed/modified via atime/mtime change. The same is not true for special files (e.g. /dev/null). Users will not generally observe atime/mtime changes when other users read/write to special files, only when someone sets atime/mtime via utimensat(). Align fsnotify events with this stat behavior and do not generate ACCESS/MODIFY events to parent watchers on read/write of special files. The events are still generated to parent watchers on utimensat(). This closes some side-channels that could be possibly used for information exfiltration [1]. [1] https://snee.la/pdf/pubs/file-notification-attacks.pdf | ||||
| CVE-2025-68305 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Prevent race in socket write iter and sock bind There is a potential race condition between sock bind and socket write iter. bind may free the same cmd via mgmt_pending before write iter sends the cmd, just as syzbot reported in UAF[1]. Here we use hci_dev_lock to synchronize the two, thereby avoiding the UAF mentioned in [1]. [1] syzbot reported: BUG: KASAN: slab-use-after-free in mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316 Read of size 8 at addr ffff888077164818 by task syz.0.17/5989 Call Trace: mgmt_pending_remove+0x3b/0x210 net/bluetooth/mgmt_util.c:316 set_link_security+0x5c2/0x710 net/bluetooth/mgmt.c:1918 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 sock_write_iter+0x279/0x360 net/socket.c:1195 Allocated by task 5989: mgmt_pending_add+0x35/0x140 net/bluetooth/mgmt_util.c:296 set_link_security+0x557/0x710 net/bluetooth/mgmt.c:1910 hci_mgmt_cmd+0x9c9/0xef0 net/bluetooth/hci_sock.c:1719 hci_sock_sendmsg+0x6ca/0xef0 net/bluetooth/hci_sock.c:1839 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg+0x21c/0x270 net/socket.c:742 sock_write_iter+0x279/0x360 net/socket.c:1195 Freed by task 5991: mgmt_pending_free net/bluetooth/mgmt_util.c:311 [inline] mgmt_pending_foreach+0x30d/0x380 net/bluetooth/mgmt_util.c:257 mgmt_index_removed+0x112/0x2f0 net/bluetooth/mgmt.c:9477 hci_sock_bind+0xbe9/0x1000 net/bluetooth/hci_sock.c:1314 | ||||
| CVE-2025-68229 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: tcm_loop: Fix segfault in tcm_loop_tpg_address_show() If the allocation of tl_hba->sh fails in tcm_loop_driver_probe() and we attempt to dereference it in tcm_loop_tpg_address_show() we will get a segfault, see below for an example. So, check tl_hba->sh before dereferencing it. Unable to allocate struct scsi_host BUG: kernel NULL pointer dereference, address: 0000000000000194 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 8356 Comm: tokio-runtime-w Not tainted 6.6.104.2-4.azl3 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 RIP: 0010:tcm_loop_tpg_address_show+0x2e/0x50 [tcm_loop] ... Call Trace: <TASK> configfs_read_iter+0x12d/0x1d0 [configfs] vfs_read+0x1b5/0x300 ksys_read+0x6f/0xf0 ... | ||||
| CVE-2025-71089 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu: disable SVA when CONFIG_X86 is set Patch series "Fix stale IOTLB entries for kernel address space", v7. This proposes a fix for a security vulnerability related to IOMMU Shared Virtual Addressing (SVA). In an SVA context, an IOMMU can cache kernel page table entries. When a kernel page table page is freed and reallocated for another purpose, the IOMMU might still hold stale, incorrect entries. This can be exploited to cause a use-after-free or write-after-free condition, potentially leading to privilege escalation or data corruption. This solution introduces a deferred freeing mechanism for kernel page table pages, which provides a safe window to notify the IOMMU to invalidate its caches before the page is reused. This patch (of 8): In the IOMMU Shared Virtual Addressing (SVA) context, the IOMMU hardware shares and walks the CPU's page tables. The x86 architecture maps the kernel's virtual address space into the upper portion of every process's page table. Consequently, in an SVA context, the IOMMU hardware can walk and cache kernel page table entries. The Linux kernel currently lacks a notification mechanism for kernel page table changes, specifically when page table pages are freed and reused. The IOMMU driver is only notified of changes to user virtual address mappings. This can cause the IOMMU's internal caches to retain stale entries for kernel VA. Use-After-Free (UAF) and Write-After-Free (WAF) conditions arise when kernel page table pages are freed and later reallocated. The IOMMU could misinterpret the new data as valid page table entries. The IOMMU might then walk into attacker-controlled memory, leading to arbitrary physical memory DMA access or privilege escalation. This is also a Write-After-Free issue, as the IOMMU will potentially continue to write Accessed and Dirty bits to the freed memory while attempting to walk the stale page tables. Currently, SVA contexts are unprivileged and cannot access kernel mappings. However, the IOMMU will still walk kernel-only page tables all the way down to the leaf entries, where it realizes the mapping is for the kernel and errors out. This means the IOMMU still caches these intermediate page table entries, making the described vulnerability a real concern. Disable SVA on x86 architecture until the IOMMU can receive notification to flush the paging cache before freeing the CPU kernel page table pages. | ||||
| CVE-2025-71194 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock in wait_current_trans() due to ignored transaction type When wait_current_trans() is called during start_transaction(), it currently waits for a blocked transaction without considering whether the given transaction type actually needs to wait for that particular transaction state. The btrfs_blocked_trans_types[] array already defines which transaction types should wait for which transaction states, but this check was missing in wait_current_trans(). This can lead to a deadlock scenario involving two transactions and pending ordered extents: 1. Transaction A is in TRANS_STATE_COMMIT_DOING state 2. A worker processing an ordered extent calls start_transaction() with TRANS_JOIN 3. join_transaction() returns -EBUSY because Transaction A is in TRANS_STATE_COMMIT_DOING 4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes 5. A new Transaction B is created (TRANS_STATE_RUNNING) 6. The ordered extent from step 2 is added to Transaction B's pending ordered extents 7. Transaction B immediately starts commit by another task and enters TRANS_STATE_COMMIT_START 8. The worker finally reaches wait_current_trans(), sees Transaction B in TRANS_STATE_COMMIT_START (a blocked state), and waits unconditionally 9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START according to btrfs_blocked_trans_types[] 10. Transaction B is waiting for pending ordered extents to complete 11. Deadlock: Transaction B waits for ordered extent, ordered extent waits for Transaction B This can be illustrated by the following call stacks: CPU0 CPU1 btrfs_finish_ordered_io() start_transaction(TRANS_JOIN) join_transaction() # -EBUSY (Transaction A is # TRANS_STATE_COMMIT_DOING) # Transaction A completes # Transaction B created # ordered extent added to # Transaction B's pending list btrfs_commit_transaction() # Transaction B enters # TRANS_STATE_COMMIT_START # waiting for pending ordered # extents wait_current_trans() # waits for Transaction B # (should not wait!) Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered extents: __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 btrfs_commit_transaction+0xbf7/0xda0 [btrfs] btrfs_sync_file+0x342/0x4d0 [btrfs] __x64_sys_fdatasync+0x4b/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Task kworker in wait_current_trans waiting for transaction commit: Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs] __schedule+0x2e7/0x8a0 schedule+0x64/0xe0 wait_current_trans+0xb0/0x110 [btrfs] start_transaction+0x346/0x5b0 [btrfs] btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs] btrfs_work_helper+0xe8/0x350 [btrfs] process_one_work+0x1d3/0x3c0 worker_thread+0x4d/0x3e0 kthread+0x12d/0x150 ret_from_fork+0x1f/0x30 Fix this by passing the transaction type to wait_current_trans() and checking btrfs_blocked_trans_types[cur_trans->state] against the given type before deciding to wait. This ensures that transaction types which are allowed to join during certain blocked states will not unnecessarily wait and cause deadlocks. | ||||
| CVE-2026-9507 | 1 Enhancesoft | 1 Osticket | 2026-06-16 | N/A |
| A session fixation vulnerability has been identified in osTicket v1.18.2. This security flaw allows an attacker to hijack a victim’s account by keeping the initial session identifier (OSTSESSID) active after a successful login. The issue lies in the fact that the application does not invalidate the pre-authentication cookie or generate a new identifier for the authenticated context. As a result, if an attacker manages to set a known session identifier in the victim’s browser, they will be able to maintain unauthorised access to the account once the victim has authenticated. | ||||
| CVE-2026-2381 | 2 Woocommerce, Wordpress | 2 Stripe Payment Gateway, Wordpress | 2026-06-16 | 6.5 Medium |
| The WooCommerce Stripe Payment Gateway plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `ajax_pay_for_order()` function in all versions up to, and including, 10.7.0 This is due to a missing order ownership or order_key verification when processing payment for an order via the `wc_stripe_pay_for_order` WC-AJAX endpoint. The function only validates a nonce (which is publicly available on any WooCommerce page where Express Checkout is enabled), but does not verify that the requesting user owns the target order and is allowed to modify it. This makes it possible for unauthenticated attackers to force any pending order into a failed status by providing a fake payment method, causing a payment exception that updates the order status to "failed" via sequential order ID enumeration. | ||||
| CVE-2026-42850 | 1 Kovidgoyal | 1 Kitty | 2026-06-16 | 8.8 High |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, it is possible to inject commands within the subshell through kitty error. A special escape code will make kitty return an error, this error is not escaped and will be correctly echoed back to the terminal with CRLF, as such it will be run by the shell in use. To exploit this bug, the victim must use a netcat or a similar program to connect to the attacker, or else listening for someone to connect. Once this condition is set, an attacker could pwn the computer of the victim using a special kitty's escape code that will run a command in the shell in use. Version 04.7.0 fixes the issue. | ||||
| CVE-2026-42851 | 1 Kovidgoyal | 1 Kitty | 2026-06-16 | 7.8 High |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, a program able to write bytes to a kitty terminal — a remote SSH peer, a downloaded file viewed with `cat`, a log line, an email body rendered in `less`, an issue body in a TUI, etc. — can cause kitty to execute attacker-supplied Python inside the running kitty process, with the user's full privileges. There is no approval prompt, no remote-control permission requirement, no shell-integration interaction, no clipboard touch, and no editor interaction. Version 0.47.0 fixes the issue. | ||||
| CVE-2026-5149 | 2 Rometheme, Wordpress | 2 Rtmkit, Wordpress | 2026-06-16 | 6.5 Medium |
| The RTMKit plugin for WordPress is vulnerable to Incorrect Authorization in all versions up to, and including, 2.0.7 This is due to the get_submission_content AJAX endpoint lacking a capability check to verify that a user has permission to access the requested form submission data. This makes it possible for authenticated attackers, with Contributor-level access and above, to view arbitrary form submissions from other users by iterating the entries_id parameter. | ||||
| CVE-2026-54055 | 1 Kovidgoyal | 1 Kitty | 2026-06-16 | 5 Medium |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.2, a local privilege escalation vulnerability exists in kitty's file transmission protocol where a child process running in the terminal can write to arbitrary files on the filesystem by exploiting a TOCTOU (Time-of-Check-Time-of-Use) race condition between symlink validation and file creation. The `os.open()` call used to create files does not use `O_NOFOLLOW`, allowing an attacker to create a symlink between the initial stat check and the actual file open, causing the write to follow the symlink to an arbitrary destination. Version 0.47.2 fixes the issue. | ||||
| CVE-2026-54056 | 1 Kovidgoyal | 1 Kitty | 2026-06-16 | 7.6 High |
| Kitty is a cross-platform GPU based terminal. In versions 0.47.0 and 0.47.1, `kitten dnd` can allow a malicious remote drag-and-drop source to overwrite or truncate arbitrary files writable by the local kitty user. Remote `text/uri-list` drops are staged in a temporary directory, but on case-sensitive filesystems duplicate remote basenames are not de-duplicated. An attacker can first create a staged symlink and then send a same-name regular-file entry. The regular-file write uses `utils.CreateAt()` / `openat(O_RDWR|O_CREAT|O_TRUNC)` without `O_NOFOLLOW`, so it follows the attacker-created symlink and writes outside the staging directory before final overwrite confirmation runs. This appears related in class to the file-transfer symlink advisory, but it is a different bug: it affects `kitten dnd` remote drag-and-drop staging, uses different vulnerable code (`kittens/dnd/drop.go` and `tools/utils/file_at_fd.go`), and reproduces on commit `4aa4a5c0567a92553a8c20a88a4352da637fca5d`, after the file-transfer `O_NOFOLLOW` fix. Version 0.47.2 patches the issue. | ||||
| CVE-2026-46020 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate damos_quota_goal->nid for node_mem_{used,free}_bp Patch series "mm/damon/core: validate damos_quota_goal->nid". node_mem[cg]_{used,free}_bp DAMOS quota goals receive the node id. The node id is used for si_meminfo_node() and NODE_DATA() without proper validation. As a result, privileged users can trigger an out of bounds memory access using DAMON_SYSFS. Fix the issues. The issue was originally reported [1] with a fix by another author. The original author announced [2] that they will stop working including the fix that was still in the review stage. Hence I'm restarting this. This patch (of 2): Users can set damos_quota_goal->nid with arbitrary value for node_mem_{used,free}_bp. But DAMON core is using those for si_meminfo_node() without the validation of the value. This can result in out of bounds memory access. The issue can actually triggered using DAMON user-space tool (damo), like below. $ sudo ./damo start --damos_action stat \ --damos_quota_goal node_mem_used_bp 50% -1 \ --damos_quota_interval 1s $ sudo dmesg [...] [ 65.565986] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 Fix this issue by adding the validation of the given node. If an invalid node id is given, it returns 0% for used memory ratio, and 100% for free memory ratio. | ||||
| CVE-2026-46022 | 1 Linux | 1 Linux Kernel | 2026-06-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient. | ||||