Export limit exceeded: 82746 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (82746 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23305 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix unwinding in error path in rocket_probe When rocket_core_init() fails (as could be the case with EPROBE_DEFER), we need to properly unwind by decrementing the counter we just incremented and if this is the first core we failed to probe, remove the rocket DRM device with rocket_device_fini() as well. This matches the logic in rocket_remove(). Failing to properly unwind results in out-of-bounds accesses. | ||||
| CVE-2026-23306 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free in pm8001_queue_command() Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors pm8001_queue_command(), however it introduces a potential cause of a double free scenario when it changes the function to return -ENODEV in case of phy down/device gone state. In this path, pm8001_queue_command() updates task status and calls task_done to indicate to upper layer that the task has been handled. However, this also frees the underlying SAS task. A -ENODEV is then returned to the caller. When libsas sas_ata_qc_issue() receives this error value, it assumes the task wasn't handled/queued by LLDD and proceeds to clean up and free the task again, resulting in a double free. Since pm8001_queue_command() handles the SAS task in this case, it should return 0 to the caller indicating that the task has been handled. | ||||
| CVE-2026-46160 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix missing last_unlink_trans update when removing a directory When removing a directory we are not updating its last_unlink_trans field, which can result in incorrect fsync behaviour in case some one fsyncs the directory after it was removed because it's holding a file descriptor on it. Example scenario: mkdir /mnt/dir1 mkdir /mnt/dir1/dir2 mkdir /mnt/dir3 sync -f /mnt # Do some change to the directory and fsync it. chmod 700 /mnt/dir1 xfs_io -c fsync /mnt/dir1 # Move dir2 out of dir1 so that dir1 becomes empty. mv /mnt/dir1/dir2 /mnt/dir3/ open fd on /mnt/dir1 call rmdir(2) on path "/mnt/dir1" fsync fd <trigger power failure> When attempting to mount the filesystem, the log replay will fail with an -EIO error and dmesg/syslog has the following: [445771.626482] BTRFS info (device dm-0): first mount of filesystem 0368bbea-6c5e-44b5-b409-09abe496e650 [445771.626486] BTRFS info (device dm-0): using crc32c checksum algorithm [445771.627912] BTRFS info (device dm-0): start tree-log replay [445771.628335] page: refcount:2 mapcount:0 mapping:0000000061443ddc index:0x1d00 pfn:0x7072a5 [445771.629453] memcg:ffff89f400351b00 [445771.629892] aops:btree_aops [btrfs] ino:1 [445771.630737] flags: 0x17fffc00000402a(uptodate|lru|private|writeback|node=0|zone=2|lastcpupid=0x1ffff) [445771.632359] raw: 017fffc00000402a fffff47284d950c8 fffff472907b7c08 ffff89f458e412b8 [445771.633713] raw: 0000000000001d00 ffff89f6c51d1a90 00000002ffffffff ffff89f400351b00 [445771.635029] page dumped because: eb page dump [445771.635825] BTRFS critical (device dm-0): corrupt leaf: root=5 block=30408704 slot=10 ino=258, invalid nlink: has 2 expect no more than 1 for dir [445771.638088] BTRFS info (device dm-0): leaf 30408704 gen 10 total ptrs 17 free space 14878 owner 5 [445771.638091] BTRFS info (device dm-0): refs 4 lock_owner 0 current 3581087 [445771.638094] item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 [445771.638097] inode generation 3 transid 9 size 16 nbytes 16384 [445771.638098] block group 0 mode 40755 links 1 uid 0 gid 0 [445771.638100] rdev 0 sequence 2 flags 0x0 [445771.638102] atime 1775744884.0 [445771.660056] ctime 1775744885.645502983 [445771.660058] mtime 1775744885.645502983 [445771.660060] otime 1775744884.0 [445771.660062] item 1 key (256 INODE_REF 256) itemoff 16111 itemsize 12 [445771.660064] index 0 name_len 2 [445771.660066] item 2 key (256 DIR_ITEM 1843588421) itemoff 16077 itemsize 34 [445771.660068] location key (259 1 0) type 2 [445771.660070] transid 9 data_len 0 name_len 4 [445771.660075] item 3 key (256 DIR_ITEM 2363071922) itemoff 16043 itemsize 34 [445771.660076] location key (257 1 0) type 2 [445771.660077] transid 9 data_len 0 name_len 4 [445771.660078] item 4 key (256 DIR_INDEX 2) itemoff 16009 itemsize 34 [445771.660079] location key (257 1 0) type 2 [445771.660080] transid 9 data_len 0 name_len 4 [445771.660081] item 5 key (256 DIR_INDEX 3) itemoff 15975 itemsize 34 [445771.660082] location key (259 1 0) type 2 [445771.660083] transid 9 data_len 0 name_len 4 [445771.660084] item 6 key (257 INODE_ITEM 0) itemoff 15815 itemsize 160 [445771.660086] inode generation 9 transid 9 size 8 nbytes 0 [445771.660087] block group 0 mode 40777 links 1 uid 0 gid 0 [445771.660088] rdev 0 sequence 2 flags 0x0 [445771.660089] atime 1775744885.641174097 [445771.660090] ctime 1775744885.645502983 [445771.660091] mtime 1775744885.645502983 [445771.660105] otime 1775744885.641174097 [445771.660106] item 7 key (257 INODE_REF 256) itemoff 15801 itemsize 14 [445771.660107] index 2 name_len 4 [445771.660108] item 8 key (257 DIR_ITEM 2676584006) itemoff 15767 itemsize 34 [445771.660109] location key (2 ---truncated--- | ||||
| CVE-2026-9632 | 1 Utt | 1 Hiper 1250gw | 2026-05-28 | 8.8 High |
| A flaw has been found in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected by this issue is the function strcpy of the file /goform/formGroupConfig of the component Web Management Interface. Executing a manipulation of the argument Profile can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used. | ||||
| CVE-2026-46367 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-05-28 | 7.6 High |
| phpMyFAQ before 4.1.2 contains a stored cross-site scripting vulnerability in Utils::parseUrl() that allows authenticated users to inject JavaScript via malformed URLs in comments. Attackers can craft URLs with unescaped quotes to inject event handlers, stealing admin session cookies and achieving full application takeover when visitors view affected FAQ pages. | ||||
| CVE-2026-46366 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-05-28 | 7.5 High |
| phpMyFAQ before 4.1.2 contains an information disclosure vulnerability in the getIdFromSolutionId() method that lacks permission filtering, allowing unauthenticated attackers to enumerate restricted FAQ entries and read their titles via the /solution_id_{id}.html endpoint. Attackers can sequentially iterate solution IDs to discover all FAQs including those restricted to specific users or groups, leaking sensitive metadata through redirect Location headers and page canonical links. | ||||
| CVE-2026-46359 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-05-28 | 7.5 High |
| phpMyFAQ before 4.1.2 contains a sql injection vulnerability in CurrentUser::setTokenData that allows authenticated attackers to execute arbitrary SQL by injecting malicious OAuth token claims. Attackers with Azure AD accounts containing SQL metacharacters in display names or JWT claims can break out of string literals and execute arbitrary database queries. | ||||
| CVE-2026-44900 | 2 Com.oviva.telematik, Oviva-ag | 2 Epa4all-client, Epa4all-client | 2026-05-28 | 8.1 High |
| epa4all-client is the Java Client for epa4all / ePA 3.0 in the Telematik Infrastruktur. Prior to 1.2.1, in SignedPublicKeysTrustValidatorImpl.isTrusted(), the ECDSA signature verification at line 45 discards the boolean return value of Signature.verify(). The method performs certificate chain validation, OCSP check, and signature algorithm setup, but never checks whether the signature actually matches. For any structurally valid signature, it returns true. This vulnerability is fixed in 1.2.1. | ||||
| CVE-2026-45575 | 2 Com.oviva.telematik, Oviva-ag | 2 Epa4all-client, Epa4all-client | 2026-05-28 | 7.4 High |
| epa4all-client is the Java Client for epa4all / ePA 3.0 in the Telematik Infrastruktur. Prior to 1.2.2, an attacker who can MITM the TLS connection between the client and the IDP (within the TI network) can substitute a forged discovery document. The forged document redirects uri_puk_idp_enc and uri_puk_idp_sig to attacker-controlled URLs. The client then encrypts the SMC-B-signed challenge response to the attacker's encryption key and POSTs it to the attacker's auth endpoint. This captures the signed authentication material. This vulnerability is fixed in 1.2.2. | ||||
| CVE-2026-44730 | 2 Citeum, Opencti-platform | 2 Opencti, Opencti | 2026-05-28 | 7.2 High |
| OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 6.9.7, an organization admin can escalate their privileges by adding a user from a different organization with higher privileges, to their own organization. This is due to incorrect ACL on userEdit relationAdd. This vulnerability is fixed in 6.9.7. | ||||
| CVE-2026-45715 | 1 Budibase | 1 Budibase | 2026-05-28 | 7.7 High |
| Budibase is an open-source low-code platform. Prior to 3.38.1, the REST datasource integration (packages/server/src/integrations/rest.ts) follows HTTP redirects without re-checking the IP blacklist, allowing an authenticated Builder to access internal services (cloud metadata, databases) by redirecting through an attacker-controlled server. This vulnerability is fixed in 3.38.1. | ||||
| CVE-2026-44635 | 1 Kysely-org | 1 Kysely | 2026-05-28 | 7.5 High |
| Kysely is a type-safe TypeScript SQL query builder. From 0.26.0 to 0.28.16, DefaultQueryCompiler.visitJSONPathLeg does not escape JSON-path metacharacters (., [, ], *, **, ?). When attacker-controlled input flows into eb.ref(col, '->$').key(input) or .at(input) — including type-safe code where the JSON column is shaped like Record<string, T> so K extends string is the inferred type — every dot becomes a path-leg separator, letting an attacker traverse from the intended key into sibling and child fields the developer never meant to expose. The result is read access (and, in update statements, write access) to JSON sub-fields outside the intended scope across MySQL, PostgreSQL ->$/->>$, and SQLite. This vulnerability is fixed in 0.28.17. | ||||
| CVE-2026-9544 | 1 Shenzhen Sixun Software | 1 Sixun Shanghui Group Business Management System | 2026-05-28 | 7.3 High |
| A vulnerability was found in Shenzhen Sixun Software Sixun Shanghui Group Business Management System 10. Affected by this vulnerability is an unknown functionality of the file /api/Dinner/PayConfig. Performing a manipulation of the argument tableno results in sql injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-45108 | 1 Himmelblau-idm | 1 Himmelblau | 2026-05-28 | 8.4 High |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. From 2.0.0 to before 3.1.5 and 2.3.11, Himmelblau contained an authentication bypass vulnerability in the Device Authorization Grant (DAG) flow that allowed a user within the same Entra ID domain to obtain a local Unix session as another user by providing their own valid credentials. The vulnerability existed in the token_validate function, which validated domain aliases for legitimate multi-domain scenarios but failed to verify that the local part (username) of the authenticated user's UPN matched the requested account username. The function only compared domains, not the complete usernames. This vulnerability is fixed in 3.1.5 and 2.3.11. | ||||
| CVE-2026-9605 | 1 Gnu | 1 Libredwg | 2026-05-28 | 7.3 High |
| A flaw has been found in GNU libredwg up to 0.13.4.8160. This issue affects the function bit_read_RC of the file bits.c of the component Dwgbmp Utility. This manipulation causes heap-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been published and may be used. Patch name: 8f03865f37f5d4ffd616fef802acc980be54d300. Applying a patch is the recommended action to fix this issue. | ||||
| CVE-2026-46121 | 1 Linux | 1 Linux Kernel | 2026-05-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path". Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race with their writes, results in use-after-free. Fix those. This patch (of 2): damon_sysfs_scheme_filter->mmecg_path can be read and written by users, via DAMON sysfs memcg_path file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the memcg_path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock. | ||||
| CVE-2026-9628 | 1 Utt | 1 Hiper 1200gw | 2026-05-28 | 8.8 High |
| A weakness has been identified in UTT HiPER 1200GW up to 2.5.3-170306. Affected is an unknown function of the file /goform/formPptpClientConfig of the component Web Management Interface. This manipulation of the argument PPTP server address/username/password/tunnel name causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. | ||||
| CVE-2026-9207 | 1 Tanium | 1 Connect | 2026-05-28 | 8.8 High |
| Tanium addressed an unauthorized code execution vulnerability in Connect. | ||||
| CVE-2026-42197 | 1 Inducer | 1 Relate | 2026-05-28 | 8.7 High |
| RELATE is a web-based courseware package. Versions prior to commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 have a stored cross-site scripting vulnerability that allows any enrolled student to execute arbitrary JavaScript in an administrator's browser session, potentially leading to full admin account takeover. The `get_user()` method in `ParticipationAdmin` renders user-controlled input using `mark_safe` combined with Python's % string formatting. This bypasses Django\'s automatic HTML escaping entirely. The value returned by `get_full_name` is derived directly from the `first_name` and `last_name` fields of the User model. These fields are freely editable by any authenticated user through the profile page (`/profile/`) with no sanitization applied. When an admin views the Participation list in the Django admin panel, the unsanitized value is rendered directly into the HTML response, causing the injected script to execute in the admin's browser. Commit 555f0efb1c5bd7531c07cd73724d7e566a81f620 fixes the issue. | ||||
| CVE-2026-9538 | 2 Archive\, Bingos | 2 \, Archive::tar | 2026-05-28 | 7.5 High |
| Archive::Tar versions before 3.10 for Perl allow memory exhaustion via attacker controlled entry size field in tar header. _read_tar() reads each entry's payload with $handle->read($$data, $block), where $block is derived from the entry's 12-byte size field in the tar header with no upper bound on that value. A crafted header declaring a multi-gigabyte size causes Perl to allocate a scalar of that size. | ||||