Export limit exceeded: 356046 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (356046 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40058 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Disallow dirty tracking if incoherent page walk Dirty page tracking relies on the IOMMU atomically updating the dirty bit in the paging-structure entry. For this operation to succeed, the paging- structure memory must be coherent between the IOMMU and the CPU. In another word, if the iommu page walk is incoherent, dirty page tracking doesn't work. The Intel VT-d specification, Section 3.10 "Snoop Behavior" states: "Remapping hardware encountering the need to atomically update A/EA/D bits in a paging-structure entry that is not snooped will result in a non- recoverable fault." To prevent an IOMMU from being incorrectly configured for dirty page tracking when it is operating in an incoherent mode, mark SSADS as supported only when both ecap_slads and ecap_smpwc are supported. | ||||
| CVE-2025-40043 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: nfc: nci: Add parameter validation for packet data Syzbot reported an uninitialized value bug in nci_init_req, which was introduced by commit 5aca7966d2a7 ("Merge tag 'perf-tools-fixes-for-v6.17-2025-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools"). This bug arises due to very limited and poor input validation that was done at nic_valid_size(). This validation only validates the skb->len (directly reflects size provided at the userspace interface) with the length provided in the buffer itself (interpreted as NCI_HEADER). This leads to the processing of memory content at the address assuming the correct layout per what opcode requires there. This leads to the accesses to buffer of `skb_buff->data` which is not assigned anything yet. Following the same silent drop of packets of invalid sizes at `nic_valid_size()`, add validation of the data in the respective handlers and return error values in case of failure. Release the skb if error values are returned from handlers in `nci_nft_packet` and effectively do a silent drop Possible TODO: because we silently drop the packets, the call to `nci_request` will be waiting for completion of request and will face timeouts. These timeouts can get excessively logged in the dmesg. A proper handling of them may require to export `nci_request_cancel` (or propagate error handling from the nft packets handlers). | ||||
| CVE-2025-40046 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix overshooting recv limit It's reported that sometimes a zcrx request can receive more than was requested. It's caused by io_zcrx_recv_skb() adjusting desc->count for all received buffers including frag lists, but then doing recursive calls to process frag list skbs, which leads to desc->count double accounting and underflow. | ||||
| CVE-2025-40048 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Let userspace take care of interrupt mask Remove the logic to set interrupt mask by default in uio_hv_generic driver as the interrupt mask value is supposed to be controlled completely by the user space. If the mask bit gets changed by the driver, concurrently with user mode operating on the ring, the mask bit may be set when it is supposed to be clear, and the user-mode driver will miss an interrupt which will cause a hang. For eg- when the driver sets inbound ring buffer interrupt mask to 1, the host does not interrupt the guest on the UIO VMBus channel. However, setting the mask does not prevent the host from putting a message in the inbound ring buffer. So let’s assume that happens, the host puts a message into the ring buffer but does not interrupt. Subsequently, the user space code in the guest sets the inbound ring buffer interrupt mask to 0, saying “Hey, I’m ready for interrupts”. User space code then calls pread() to wait for an interrupt. Then one of two things happens: * The host never sends another message. So the pread() waits forever. * The host does send another message. But because there’s already a message in the ring buffer, it doesn’t generate an interrupt. This is the correct behavior, because the host should only send an interrupt when the inbound ring buffer transitions from empty to not-empty. Adding an additional message to a ring buffer that is not empty is not supposed to generate an interrupt on the guest. Since the guest is waiting in pread() and not removing messages from the ring buffer, the pread() waits forever. This could be easily reproduced in hv_fcopy_uio_daemon if we delay setting interrupt mask to 0. Similarly if hv_uio_channel_cb() sets the interrupt_mask to 1, there’s a race condition. Once user space empties the inbound ring buffer, but before user space sets interrupt_mask to 0, the host could put another message in the ring buffer but it wouldn’t interrupt. Then the next pread() would hang. Fix these by removing all instances where interrupt_mask is changed, while keeping the one in set_event() unchanged to enable userspace control the interrupt mask by writing 0/1 to /dev/uioX. | ||||
| CVE-2025-40049 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix uninit-value in squashfs_get_parent Syzkaller reports a "KMSAN: uninit-value in squashfs_get_parent" bug. This is caused by open_by_handle_at() being called with a file handle containing an invalid parent inode number. In particular the inode number is that of a symbolic link, rather than a directory. Squashfs_get_parent() gets called with that symbolic link inode, and accesses the parent member field. unsigned int parent_ino = squashfs_i(inode)->parent; Because non-directory inodes in Squashfs do not have a parent value, this is uninitialised, and this causes an uninitialised value access. The fix is to initialise parent with the invalid inode 0, which will cause an EINVAL error to be returned. Regular inodes used to share the parent field with the block_list_start field. This is removed in this commit to enable the parent field to contain the invalid inode number 0. | ||||
| CVE-2025-40055 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix double free in user_cluster_connect() user_cluster_disconnect() frees "conn->cc_private" which is "lc" but then the error handling frees "lc" a second time. Set "lc" to NULL on this path to avoid a double free. | ||||
| CVE-2025-40061 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race in do_task() when draining When do_task() exhausts its iteration budget (!ret), it sets the state to TASK_STATE_IDLE to reschedule, without a secondary check on the current task->state. This can overwrite the TASK_STATE_DRAINING state set by a concurrent call to rxe_cleanup_task() or rxe_disable_task(). While state changes are protected by a spinlock, both rxe_cleanup_task() and rxe_disable_task() release the lock while waiting for the task to finish draining in the while(!is_done(task)) loop. The race occurs if do_task() hits its iteration limit and acquires the lock in this window. The cleanup logic may then proceed while the task incorrectly reschedules itself, leading to a potential use-after-free. This bug was introduced during the migration from tasklets to workqueues, where the special handling for the draining case was lost. Fix this by restoring the original pre-migration behavior. If the state is TASK_STATE_DRAINING when iterations are exhausted, set cont to 1 to force a new loop iteration. This allows the task to finish its work, so that a subsequent iteration can reach the switch statement and correctly transition the state to TASK_STATE_DRAINED, stopping the task as intended. | ||||
| CVE-2025-40063 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: comp - Use same definition of context alloc and free ops In commit 42d9f6c77479 ("crypto: acomp - Move scomp stream allocation code into acomp"), the crypto_acomp_streams struct was made to rely on having the alloc_ctx and free_ctx operations defined in the same order as the scomp_alg struct. But in that same commit, the alloc_ctx and free_ctx members of scomp_alg may be randomized by structure layout randomization, since they are contained in a pure ops structure (containing only function pointers). If the pointers within scomp_alg are randomized, but those in crypto_acomp_streams are not, then the order may no longer match. This fixes the problem by removing the union from scomp_alg so that both crypto_acomp_streams and scomp_alg will share the same definition of alloc_ctx and free_ctx, ensuring they will always have the same layout. | ||||
| CVE-2025-40068 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: Fix integer overflow in run_unpack() The MFT record relative to the file being opened contains its runlist, an array containing information about the file's location on the physical disk. Analysis of all Call Stack paths showed that the values of the runlist array, from which LCNs are calculated, are not validated before run_unpack function. The run_unpack function decodes the compressed runlist data format from MFT attributes (for example, $DATA), converting them into a runs_tree structure, which describes the mapping of virtual clusters (VCN) to logical clusters (LCN). The NTFS3 subsystem also has a shortcut for deleting files from MFT records - in this case, the RUN_DEALLOCATE command is sent to the run_unpack input, and the function logic provides that all data transferred to the runlist about file or directory is deleted without creating a runs_tree structure. Substituting the runlist in the $DATA attribute of the MFT record for an arbitrary file can lead either to access to arbitrary data on the disk bypassing access checks to them (since the inode access check occurs above) or to destruction of arbitrary data on the disk. Add overflow check for addition operation. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2025-40070 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: pps: fix warning in pps_register_cdev when register device fail Similar to previous commit 2a934fdb01db ("media: v4l2-dev: fix error handling in __video_register_device()"), the release hook should be set before device_register(). Otherwise, when device_register() return error and put_device() try to callback the release function, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567 Modules linked in: CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567 Call Trace: <TASK> kobject_cleanup+0x136/0x410 lib/kobject.c:689 kobject_release lib/kobject.c:720 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0xe9/0x130 lib/kobject.c:737 put_device+0x24/0x30 drivers/base/core.c:3797 pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402 pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108 pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57 tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432 tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563 tiocsetd drivers/tty/tty_io.c:2429 [inline] tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Before commit c79a39dc8d06 ("pps: Fix a use-after-free"), pps_register_cdev() call device_create() to create pps->dev, which will init dev->release to device_create_release(). Now the comment is outdated, just remove it. Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed in pps_register_source() to avoid a double free in the failure case. | ||||
| CVE-2025-40076 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq() Starting with commit dd26c1a23fd5 ("PCI: rcar-host: Switch to msi_create_parent_irq_domain()"), the MSI parent IRQ domain is NULL because the object of type struct irq_domain_info passed to: msi_create_parent_irq_domain() -> irq_domain_instantiate()() -> __irq_domain_instantiate() has no reference to the parent IRQ domain. Using msi->domain->parent as an argument for generic_handle_domain_irq() leads to below error: "Unable to handle kernel NULL pointer dereference at virtual address" This error was identified while switching the upcoming RZ/G3S PCIe host controller driver to msi_create_parent_irq_domain() (which was using a similar pattern to handle MSIs (see link section)), but it was not tested on hardware using the pcie-rcar-host controller driver due to lack of hardware. [mani: reworded subject and description] | ||||
| CVE-2025-40080 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nbd: restrict sockets to TCP and UDP Recently, syzbot started to abuse NBD with all kinds of sockets. Commit cf1b2326b734 ("nbd: verify socket is supported during setup") made sure the socket supported a shutdown() method. Explicitely accept TCP and UNIX stream sockets. | ||||
| CVE-2025-4009 | 2026-04-15 | N/A | ||
| The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz. This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365). CVE-2025-4009 covers the command injection in feature-transfer-import.php CVE-2025-10364 covers the command injection in feature-transfer-export.php Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices. This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others. | ||||
| CVE-2025-43917 | 1 Pritunl | 1 Pritunl-client | 2026-04-15 | 8.2 High |
| In Pritunl Client before 1.3.4220.57, an administrator with access to /Applications can escalate privileges after uninstalling the product. Specifically, an administrator can insert a new file at the pathname of the removed pritunl-service file. This file then is executed by a LaunchDaemon as root. | ||||
| CVE-2025-40933 | 2026-04-15 | 7.5 High | ||
| Apache::AuthAny::Cookie v0.201 or earlier for Perl generates session ids insecurely. Session ids are generated using an MD5 hash of the epoch time and a call to the built-in rand function. The epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage. Predicable session ids could allow an attacker to gain access to systems. | ||||
| CVE-2025-41090 | 1 Ccn-cert | 1 Microclaudia | 2026-04-15 | N/A |
| microCLAUDIA in v3.2.0 and prior has an improper access control vulnerability. This flaw allows an authenticated user to perform unauthorized actions on other organizations' systems by sending direct API requests. To do so, the attacker can use organization identifiers obtained through a compromised endpoint or deduced manually. This vulnerability allows access between tenants, enabling an attacker to list and manage remote assets, uninstall agents, and even delete vaccines configurations. | ||||
| CVE-2025-42600 | 2026-04-15 | N/A | ||
| This vulnerability exists in Meon KYC solutions due to missing restrictions on the number of incorrect One-Time Password (OTP) attempts through certain API endpoints of login process. A remote attacker could exploit this vulnerability by performing a brute force attack on OTP, which could lead to gain unauthorized access to other user accounts. | ||||
| CVE-2025-43859 | 1 Redhat | 2 Ansible Automation Platform, Openstack | 2026-04-15 | 9.1 Critical |
| h11 is a Python implementation of HTTP/1.1. Prior to version 0.16.0, a leniency in h11's parsing of line terminators in chunked-coding message bodies can lead to request smuggling vulnerabilities under certain conditions. This issue has been patched in version 0.16.0. Since exploitation requires the combination of buggy h11 with a buggy (reverse) proxy, fixing either component is sufficient to mitigate this issue. | ||||
| CVE-2025-43875 | 1 Johnsoncontrols | 5 Istar Edge G2, Istar Ultra, Istar Ultra G2 and 2 more | 2026-04-15 | N/A |
| Under certain circumstances a successful exploitation could result in access to the device. | ||||
| CVE-2025-46275 | 2026-04-15 | 9.8 Critical | ||
| WGS-80HPT-V2 and WGS-4215-8T2S are missing authentication that could allow an attacker to create an administrator account without knowing any existing credentials. | ||||