Export limit exceeded: 369410 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (369410 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-28316 | 1 Solarwinds | 1 Serv-u | 2026-07-21 | 4.7 Medium |
| SolarWinds Serv-U is affected by an insecure direct object reference (IDOR) vulnerability that can lead to privilege escalation to a system administrator with the ability to execute commands as the root user. This issue requires a domain account with administrator access. The impact is lower in Windows deployments. | ||||
| CVE-2026-28321 | 1 Solarwinds | 1 Serv-u | 2026-07-21 | 4.7 Medium |
| SolarWinds Serv-U is affected by a broken access control vulnerability that could allow arbitrary file read and write, which can then be used to escalate privileges and execute code as root. A domain administrator access is required, and the impact is lower in Windows installations. | ||||
| CVE-2026-16243 | 1 Eclipse | 1 Omr | 2026-07-21 | N/A |
| In Eclipse OMR versions up to 0.11, the arraycmp SIMD implementation for Z and P does not check if the number of bytes to compare is zero. | ||||
| CVE-2026-64059 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio->private handling in netfs_perform_write() Under some circumstances, netfs_perform_write() doesn't correctly manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing to a group and pointing to a netfs_folio struct, leading to potential multiple attachments of private data with associated folio ref leaks and also leaks of netfs_folio structs or netfs_group refs. Fix this by consolidating the place at which a folio is marked uptodate in one place and having that look at what's attached to folio->private and decide how to clean it up and then set the new group. Also, the content shouldn't be flushed if group is NULL, even if a group is specified in the netfs_group parameter, as that would be the case for a new folio. A filesystem should always specify netfs_group or never specify netfs_group. The Sashiko auto-review tool noted that it was theoretically possible that the fpos >= ctx->zero_point section might leak if it modified a streaming write folio. This is unlikely, but with a network filesystem, third party changes can happen. It also pointed out that __netfs_set_group() would leak if called multiple times on the same folio from the "whole folio modify section". | ||||
| CVE-2026-64074 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf(). | ||||
| CVE-2026-64075 | 1 Linux | 1 Linux Kernel | 2026-07-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fprobe: Fix unregister_fprobe() to wait for RCU grace period Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer") changed fprobe to register struct fprobe to an rcu-hlist, but it forgot to wait for RCU GP. Thus there can be use-after-free if the fprobe is released right after unregistering. This can be happened on fprobe event and sample module code. To fix this issue, add synchronize_rcu() in unregister_fprobe(). Note that BPF is OK because fprobe is used as a part of bpf_kprobe_multi_link. This unregisters its fprobe in bpf_kprobe_multi_link_release() and it is deallocated via bpf_kprobe_multi_link_dealloc(), which is invoked from bpf_link_defer_dealloc_rcu_gp() RCU callback. For BPF, this also introduced unregister_fprobe_async() which does NOT wait for RCU grace priod. | ||||
| CVE-2026-47395 | 1 Mervinpraison | 2 Praisonai, Praisonaiagents | 2026-07-21 | 5.5 Medium |
| PraisonAI is a multi-agent teams system. Prior to version 4.6.40 of PraisonAI, corresponding to version 1.6.40 of praisonaiagents, PraisonAI's direct-prompt CLI automatically expands `@url:` mentions in raw prompt text before agent execution begins. If a prompt contains `@url:<http-or-https-url>`, the CLI calls `MentionsParser.process(...)`. The `@url:` handler then performs a direct `urllib.request.urlopen()` request to the attacker-controlled URL and returns the response body. That response body is prepended to the final model prompt context. There is no loopback/private-address restriction, no metadata-service restriction, and no approval gate before the fetch. As a result, attacker-influenced prompt text can cause the operator's machine to fetch localhost-only HTTP resources and inject the response into model context. PraisonAI version 4.6.40 and praisonaiagents version 1.6.40 contain a fix. | ||||
| CVE-2026-24232 | 1 Nvidia | 1 Transformers4rec | 2026-07-21 | 4.3 Medium |
| NVIDIA Tranformers4Rec contains a vulnerability where an attacker could cause improper deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure. | ||||
| CVE-2026-15789 | 1 Moby | 1 Buildkit | 2026-07-21 | N/A |
| A custom client can produce such an upload request to the BuildKit daemon that files can escape from the BuildKit-controlled state directory. The client needs to have valid permissions to access the BuildKit control API to issue builds, e.g., bypass authentication, etc. | ||||
| CVE-2026-16441 | 1 Eclipse | 1 Openj9 | 2026-07-21 | N/A |
| In Eclipse OpenJ9 versions up to 0.60, when executing class files where a previously concrete superclass method has been recompiled as abstract, execution is incorrectly delegated to an interface default method. | ||||
| CVE-2026-65050 | 1 Ninjaforms | 1 Ninja Forms | 2026-07-21 | 6.5 Medium |
| Ninja Forms WordPress plugin version 3.14.8 and prior contains a missing authorization vulnerability in the render callback of the `ninja-forms/submissions-table` Gutenberg block that allows authenticated attackers with Author-level privileges to expose stored form submissions to unauthenticated visitors by embedding the block with an arbitrary formID on a published post. Attackers can retrieve the signed bearer token injected into every page visitor's browser via `wp_localize_script` and use it against the REST API submissions endpoint to access all saved form submission field values, including sensitive personally identifiable information such as names, email addresses, and phone numbers. | ||||
| CVE-2026-64823 | 1 Home-assistant | 1 Home-assistant | 2026-07-21 | 4.7 Medium |
| Home Assistant Core before 2026.5.4 contains a cross-site scripting vulnerability in the Shelly integration's async_get_media_image() method that allows attackers controlling a Shelly device's thumb field to serve arbitrary HTML content by supplying a data URI with a text/html content type without validation against an image-only allowlist. Attackers can cause the media player proxy endpoint to serve attacker-controlled bytes with Content-Type text/html in the Home Assistant web origin, enabling theft of session tokens from local storage and authenticated calls to sensitive service endpoints including lock, alarm, and cover controls. | ||||
| CVE-2026-16421 | 2026-07-21 | N/A | ||
| Inappropriate implementation in WebAudio in Google Chrome prior to 150.0.7871.182 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-16485 | 1 Sourcecodester | 1 Class And Exam Timetabling System | 2026-07-21 | 4.3 Medium |
| A vulnerability has been found in SourceCodester Class and Exam Timetabling System 1.0. Affected by this issue is some unknown functionality of the file /class.php. Such manipulation of the argument day leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2026-64093 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone | ||||
| CVE-2026-64102 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. | ||||
| CVE-2026-64110 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: igc: fix potential skb leak in igc_fpe_xmit_smd_frame() When igc_fpe_init_tx_descriptor() fails, no one takes care of an allocated skb, leaking it. [1] Use dev_kfree_skb_any() on failure. Tested on an I226 adapter with the following command, while injecting faults in igc_fpe_init_tx_descriptor() to trigger the error path. # ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on [1] unreferenced object 0xffff888113c6cdc0 (size 224): ... backtrace (crc be3d3fda): kmem_cache_alloc_node_noprof+0x3b1/0x410 __alloc_skb+0xde/0x830 igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0 igc_fpe_send_mpacket+0x37/0x90 ethtool_mmsv_verify_timer+0x15e/0x300 | ||||
| CVE-2026-64111 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: lsm: hold cred_guard_mutex for lsm_set_self_attr() Just as proc_pid_attr_write() already does before calling the LSM hook. This only matters for SELinux and AppArmor which check whether the process is being ptraced and if so, whether to allow the transition. | ||||
| CVE-2026-64114 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-07-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||