| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: configfs: Bound snprintf() return in tg_pt_gp_members_show()
target_tg_pt_gp_members_show() formats LUN paths with snprintf() into a
256-byte stack buffer, then will memcpy() cur_len bytes from that
buffer. snprintf() returns the length the output would have had, which
can exceed the buffer size when the fabric WWN is long because iSCSI IQN
names can be up to 223 bytes. The check at the memcpy() site only
guards the destination page write, not the source read, so memcpy() will
read past the stack buffer and copy adjacent stack contents to the sysfs
reader, which when CONFIG_FORTIFY_SOURCE is enabled, fortify_panic()
will be triggered.
Commit 27e06650a5ea ("scsi: target: target_core_configfs: Add length
check to avoid buffer overflow") added the same bound to the
target_lu_gp_members_show() but the tg_pt_gp variant was missed so
resolve that here. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opens
As prepare can be called mulitple times, this can result in multiple
graph opens for playback path.
This will result in a memory leaks, fix this by adding a check before
opening. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix a potential clc buffer length underflow
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Reject unknown opcodes before ICRC processing
Even after applying commit 7244491dab34 ("RDMA/rxe: Validate pad and ICRC
before payload_size() in rxe_rcv"), a single unauthenticated UDP packet
can still trigger panic. That patch handled payload_size() underflow only
for valid opcodes with short packets, not for packets carrying an unknown
opcode. The unknown-opcode OOB read described below predates that commit
and reaches back to the initial Soft RoCE driver.
The check added there reads
pkt->paylen < header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE
where header_size(pkt) expands to rxe_opcode[pkt->opcode].length. The
rxe_opcode[] array has 256 entries but is only populated for defined IB
opcodes; any other entry (for example opcode 0xff) is zero-initialized, so
length == 0 and the check degenerates to
pkt->paylen < 0 + bth_pad(pkt) + RXE_ICRC_SIZE
which does not constrain pkt->paylen enough. rxe_icrc_hdr() then computes
rxe_opcode[pkt->opcode].length - RXE_BTH_BYTES
which underflows when length == 0 and passes a huge value to rxe_crc32(),
causing an out-of-bounds read of the skb payload.
Reproduced on v7.0-rc7 with that fix applied, QEMU/KVM with
CONFIG_RDMA_RXE=y and CONFIG_KASAN=y, after
rdma link add rxe0 type rxe netdev eth0
A single 48-byte UDP packet to port 4791 with BTH opcode=0xff and
QPN=IB_MULTICAST_QPN triggers:
BUG: KASAN: slab-out-of-bounds in crc32_le+0x115/0x170
Read of size 1 at addr ...
The buggy address is located 0 bytes to the right of
allocated 704-byte region
Call Trace:
crc32_le+0x115/0x170
rxe_icrc_hdr.isra.0+0x226/0x300
rxe_icrc_check+0x13f/0x3a0
rxe_rcv+0x6e1/0x16e0
rxe_udp_encap_recv+0x20a/0x320
udp_queue_rcv_one_skb+0x7ed/0x12c0
Subsequent packets with the same shape fault on unmapped memory and panic
the kernel. The trigger requires only module load and "rdma link add"; no
QP, no connection, and no authentication.
Fix this by rejecting packets whose opcode has no rxe_opcode[] entry,
detected via the zero mask or zero length, before any length arithmetic
runs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo
rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack
without initialisation:
struct ifla_vf_broadcast vf_broadcast;
The struct contains a single fixed 32-byte field:
/* include/uapi/linux/if_link.h */
struct ifla_vf_broadcast {
__u8 broadcast[32];
};
The function then copies dev->broadcast into it using dev->addr_len
as the length:
memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len);
On Ethernet devices (the overwhelming majority of SR-IOV NICs)
dev->addr_len is 6, so only the first 6 bytes of broadcast[] are
written. The remaining 26 bytes retain whatever was previously on
the kernel stack. The full struct is then handed to userspace via:
nla_put(skb, IFLA_VF_BROADCAST,
sizeof(vf_broadcast), &vf_broadcast)
leaking up to 26 bytes of uninitialised kernel stack per VF per
RTM_GETLINK request, repeatable.
The other vf_* structs in the same function are explicitly zeroed
for exactly this reason - see the memset() calls for ivi,
vf_vlan_info, node_guid and port_guid a few lines above.
vf_broadcast was simply missed when it was added.
Reachability: any unprivileged local process can open AF_NETLINK /
NETLINK_ROUTE without capabilities and send RTM_GETLINK with an
IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks
each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per
VF per request. Stack residue at this call site can include return
addresses and transient sensitive data; KASAN with stack
instrumentation, or KMSAN, will flag the nla_put() when reproduced.
Zero the on-stack struct before the partial memcpy, matching the
existing pattern used for the other vf_* structs in the same
function. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free in create_space_info() error path
When kobject_init_and_add() fails, the call chain is:
create_space_info()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&space_info->kobj)
-> space_info_release()
-> kfree(space_info)
Then control returns to create_space_info():
btrfs_sysfs_add_space_info_type() returns error
-> goto out_free
-> kfree(space_info)
This causes a double free.
Keep the direct kfree(space_info) for the earlier failure path, but
after btrfs_sysfs_add_space_info_type() has called kobject_put(), let
the kobject release callback handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Check event message buffer response for bad data
The event message buffer response data size got checked later when
processing, but check it right after the response comes back. It
appears some BMCs may return an empty message instead of an error
when fetching events.
There are apparently some new BMCs that make this error, so we need to
compensate. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp()
Sashiko points out that pd->uctx isn't initialized until late in the
function so all these error flow references are NULL and will crash. Use
the uctx that isn't NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate block number from NFS file handle in isofs_export_iget
isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker-
controlled block number (ifid->block or ifid->parent_block) from
the NFS file handle to isofs_export_iget(), which only rejects
block == 0 before calling isofs_iget() and ultimately sb_bread().
A crafted file handle with fh_len sufficient to pass the check
added by commit 0405d4b63d08 ("isofs: Prevent the use of too small
fid") can still drive the server to read any in-range block on the
backing device as if it were an iso_directory_record. That earlier
fix was assigned CVE-2025-37780.
sb_bread() on an out-of-range block returns NULL cleanly via the
EIO path, so there is no memory-safety violation. For in-range
reads of adjacent-partition data on the same block device, the
unrelated bytes end up in iso_inode_info fields that reach the NFS
client as dentry metadata. The deployment surface (isofs exported
over NFS from loop-mounted images) is narrow and requires an
authenticated NFS peer, but the malformed-file-handle class is
reportable as hardening next to the existing CVE-2025-37780 fix.
Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so
the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent()
call sites with a single line. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43: enforce bounds check on firmware key index in b43_rx()
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: Use cached t->net in ip6erspan_changelink().
After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of
rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns
ip6gre hash via link_net. ip6erspan_changelink() was not converted in
that series and still uses dev_net(dev), which diverges from the
device's creation netns after IFLA_NET_NS_FD migration.
This re-inserts the tunnel into the wrong per-netns hash. The
original netns keeps a stale entry. When that netns is later
destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a
slab-use-after-free reported by KASAN, followed by a kernel BUG at
net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify().
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net).
ip6gre_changelink() earlier in the same file already uses the cached
t->net; only ip6erspan_changelink() has the wrong shape. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix slab-out-of-bounds access in auth message processing
If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY
contains a positive value in its result field, it is treated as an
error code by ceph_handle_auth_reply() and returned to
handle_auth_reply(). Thereafter, an attempt is made to send the
preallocated message of type CEPH_MSG_AUTH, where the returned value is
interpreted as the size of the front segment to send. If the result
value in the message is greater than the size of the memory buffer
allocated for the front segment, an out-of-bounds access occurs, and
the content of the memory region beyond this buffer is sent out.
This patch fixes the issue by treating only negative values in the
result field as errors. Positive values are therefore treated as success
in the same way as a zero value. Additionally, a BUG_ON is added to
__send_prepared_auth_request() comparing the len parameter to
front_alloc_len to prevent sending the message if it exceeds the bounds
of the allocation and to make it easier to catch any logic flaws leading
to this. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Fix shadow paging use-after-free due to unexpected GFN
The shadow MMU computes GFNs for direct shadow pages using sp->gfn plus
the SPTE index. This assumption breaks for shadow paging if the guest
page tables are modified between VM entries (similar to commit
aad885e77496, "KVM: x86/mmu: Drop/zap existing present SPTE even
when creating an MMIO SPTE", 2026-03-27). The flow is as follows:
- a PDE is installed for a 2MB mapping, and a page in that area is
accessed. KVM creates a kvm_mmu_page consisting of 512 4KB pages;
the kvm_mmu_page is marked by FNAME(fetch) as direct-mapped because
the guest's mapping is a huge page (and thus contiguous).
- the PDE mapping is changed from outside the guest.
- the guest accesses another page in the same 2MB area. KVM installs
a new leaf SPTE and rmap entry; the SPTE uses the "correct" GFN
(i.e. based on the new mapping, as changed in the previous step) but
that GFN is outside of the [sp->gfn, sp->gfn + 511] range; therefore
the rmap entry cannot be found and removed when the kvm_mmu_page
is zapped.
- the memslot that covers the first 2MB mapping is deleted, and the
kvm_mmu_page for the now-invalid GPA is zapped. However, rmap_remove()
only looks at the [sp->gfn, sp->gfn + 511] range established in step 1,
and fails to find the rmap entry that was recorded by step 3.
- any operation that causes an rmap walk for the same page accessed
by step 3 then walks a stale rmap and dereferences a freed kvm_mmu_page.
This includes dirty logging or MMU notifier invalidations (e.g., from
MADV_DONTNEED).
The underlying issue is that KVM's walking of shadow PTEs assumes that
if a SPTE is present when KVM wants to install a non-leaf SPTE, then the
existing kvm_mmu_page must be for the correct gfn. Because the only way
for the gfn to be wrong is if KVM messed up and failed to zap a SPTE...
which shouldn't happen, but *actually* only happens in response to a
guest write.
That bug dates back literally forever, as even the first version of KVM
assumes that the GFN matches and walks into the "wrong" shadow page.
However, that was only an imprecision until 2032a93d66fa ("KVM: MMU:
Don't allocate gfns page for direct mmu pages") came along.
Fix it by checking for a target gfn mismatch and zapping the existing
SPTE. That way the old SP and rmap entries are gone, KVM installs
the rmap in the right location, and everyone is happy. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix unlocked call to hns_roce_qp_remove()
Sashiko points out that hns_roce_qp_remove() requires the caller to hold
locks. The error flow in hns_roce_create_qp_common() doesn't hold those
locks for the error unwind so it risks corrupting memory.
Grab the same locks the other two callers use. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix memory leak on ulpi_register() error paths
Commit 01af542392b5 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:si: Return state to normal if message allocation fails
There were places where nothing would get started if a message
allocation failed, so the driver needs to return to normal state. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-thin: fix metadata refcount underflow
There's a bug in dm-thin in the function rebalance_children. If the
internal btree node has one entry, the code tries to copy all btree
entries from the node's child to the node itself and then decrement the
child's reference count.
If the child node is shared (it has reference count > 1), we won't free
it, so there would be two pointers to each of the grandchildren nodes.
But the reference counts of the grandchildren is not increased, thus the
reference count doesn't match the number of pointers that point to the
grandchildren. This results in "device mapper: space map common: unable
to decrement block" errors.
Fix this bug by incrementing reference counts on the grandchildren if the
btree node is shared. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ucan: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the control message buffer lifetime so that it is released on driver
unbind. |
